Panasonic AG-UX90 AG-UX90 Operating Instructions - Page 53

Recording Focus Perform focus adjustments using the focus ring. If auto focusing is difficult due to the conditions, then use Manual Focus. FOCUS A M  ʿ A FOCUS A/M/¶ switch B PUSH AUTO button C Focus ring PUSH AUTO   ≥ Switch to Manual Mode. (l 45) 1 Set the FOCUS A/M/¶ switch to [M] to enable Manual Focus. ≥ It will switch to MF from AF. 2 Adjust the focus by rotating the focus ring. ≥ The focus value can be set from MF00 (Focus distance*: approximately 10.0 cm (3.93 q) [When [FOCUS MACRO] (l 90, 157) is set to [ON]]) to MF99 (Focus distance*: infinity). The larger the focus value gets, the further the position where focus is achieved. * Focus distance refers to the minimum distance where a subject can be brought into focus. ≥ If you move the FOCUS A/M/¶ switch towards [¶], focus will be adjusted to MF95 on the infinity side. (The FOCUS A/M/¶ switch will return to the [M] position.) ≥ To return to Auto Focus, set the FOCUS A/M/¶ switch to [A], or set [AF] to [ON] and switch to Auto Mode. (l 45) ≥ If you set [FOCUS MACRO] to [ON], when the distance to the subject approaches within 0.95 m (3.12 feet) approx., the unit switches to the macro range and or . (The unit may switch to the macro range even when the distance to the subject is 0.95 m (3.12 feet) or more depending on the subject.) ≥ Depending on the zoom magnification, this unit may fail to switch to the macro range, or go to a non-displayed focus value. ≥ When you perform a zoom operation in the macro range, this unit may go out of focus. ≥ When [AF] is set to [ON] and this unit is set to Auto Mode, auto focusing is performed regardless of the position of FOCUS A/M/¶ switch. (l 45) ≥ The unit of the focus value display varies depending on the [FOCUS DISPLAY] setting in the [DISP SETUP] menu. You can also change the setting so that the on-screen display does not appear. (l 172) - 53 -