Panasonic AG-UX90 AG-UX90 Operating Instructions - Page 176
ALERT SOUND], ECONOMY BATT], USB MODE], USB MODE SELECT], Beeps for 4 times, Volume low, Volume high
![]() |
View all Panasonic AG-UX90 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 176 highlights
[ALERT SOUND] Touch screen operation, start and stop of recording can be confirmed with this sound. When [OFF] is selected, the sound is not output at the start/end of recording, etc. [OFF]/ (Volume low)/ (Volume high) 2 Beeps for 4 times When an error occurs. Check the message displayed on the screen. (l 185) [ECONOMY (BATT)] When about 5 minutes have passed without any operation, this unit automatically turns off to save battery life. [ON]/[OFF] ≥ This unit will not automatically turn off even if the [ECONOMY (BATT)] is set to [ON] in following cases: j PRE-REC is used (l 92, 165) j When [USB MODE SELECT] is set to [DEVICE] and this unit is connected to a PC. (l 123) [ECONOMY (AC)] When connected to AC adaptor about 15 minutes have passed without any operation, this unit automatically turns off. [ON]/[OFF] ≥ This unit will not automatically turn off even if the [ECONOMY (AC)] is set to [ON] in following cases: j PRE-REC is used (l 92, 165) j When [USB MODE SELECT] is set to [DEVICE] and this unit is connected to a PC. (l 123) [USB MODE] Enable/disable connections to the USB terminals of this unit. (l 97) [ON]/[OFF] [USB MODE SELECT] The unit's USB terminal to which a USB Cable will be connected can be switched. Switch the terminal according to the shape of the USB Cable's plug you intend to connect to the unit. [HOST]: [DEVICE]: For connecting to the USB HOST terminal (Type A) of the unit For connecting to the USB DEVICE terminal (Type Micro-B) of the unit - 176 -
![](/manual_guide/products/panasonic-agux90-agux90-operating-instructions-3c8f8a9/176.png)