Panasonic AG-UX90 AG-UX90 Operating Instructions - Page 147
Drs Effect], Auto Iris Level], Auto Iris Level Effect], Nr Control]
View all Panasonic AG-UX90 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
[DRS EFFECT] Selects the level of the DRS function. 1 Touch [DRS EFFECT]. 2 Touch / to select the setting item. [1]/[2]/[3] ≥ Higher the value, greater the compression level of the highly illuminated area. ≥ Higher the value, greater the noise of the dark area. 3 Touch [EXIT] to exit the menu screen. ≥ This item cannot be set in Variable Frame Rate Mode. (l 92) [AUTO IRIS LEVEL] This enables/disables Auto Iris Level. (l 66) [ON]/[OFF] [AUTO IRIS LEVEL EFFECT] Adjusting brightness during the Auto Iris Mode. (l 66) 1 Touch [AUTO IRIS LEVEL EFFECT]. 2 Touch / to adjust settings. ≥ You can select a value between s50 and r50. 3 Touch [EXIT] to exit the menu screen. ≥ The default setting that is assigned to [F1:] in [FILE SELECT] is "0". [NR CONTROL] You can control the noise reduction effect and afterimage intensity by adjusting the noise reduction setting. 1 Touch [NR CONTROL]. 2 Touch / to adjust settings. ≥ You can select a value between s7 and r7. ≥ Adjusting the setting in the minus (s) direction weakens the noise reduction effect, thereby reducing afterimages. Note that this also tends to increase noise. ≥ Adjusting the setting in the plus (r) direction enhances the noise reduction effect, thereby reducing noise. Note that this may also cause afterimages to appear more frequently. 3 Touch [EXIT] to exit the menu screen. ≥ The default setting that is assigned to [F1:] in [FILE SELECT] is "0". - 147 -