Panasonic BB-HCE481A Pro-line Network Cam - Page 15
To Access the Camera in IPv6 - network camera
UPC - 037988845095
View all Panasonic BB-HCE481A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Operating Instructions 1.4.1 To Access the Camera in IPv6 You need to prepare the following to access the camera in IPv6. • PC Requirements Operating System: Windows XP Service Pack 1 or later Web Browser: Internet Explorer 6.0 or later • An IPv6 Router • An IPv6 Connection Service To connect in IPv6, subscribe to the ISP's "IPv4/IPv6 Dual-Stack" or "IPv6 over IPv4 Tunneling" service. The camera does not function on IPv6-only networks. IPv6 Domain Name Service In Windows XP, you cannot access the camera by entering its IP address in the web browser. Enter the IPv6 URL that was registered using the domain name service. We recommend the Viewnetcam.com service (see page 70) as a domain name service. Ask your ISP about other IPv6 domain name services. What is IPv6? • IPv6 is short for "Internet Protocol Version 6". • IPv6 was created to provide the additional IP addresses that will be needed as the Internet continues to expand. • IPv6 is expected to gradually replace IPv4, with the 2 coexisting for a number of years during a transition period. • Though most ISPs (Internet Service Providers) do not yet support IPv6, many local networks already use it. When your ISP supports IPv6, your Panasonic Network Camera will be ready! • For more information, visit http://www.ipv6.org/. Setting up the IPv6 Router, your PC, and the Camera Setting up the IPv6 Router Set up the router as you subscribe to the IPv6 service. If access from the WAN side is disabled on the router, enable the TCP packets from the WAN side using packet filtering. See the Panasonic Network Camera support website at http:// panasonic.co.jp/pcc/products/en/netwkcam/ for information about the recommended routers. 15