Panasonic BB-HCE481A Pro-line Network Cam - Page 185
When you are using a router that supports UPnP™, When you are using a router that does not support
![]() |
UPC - 037988845095
View all Panasonic BB-HCE481A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 185 highlights
Operating Instructions Note • • • See page 17 for the Single Camera page. If you will enable Internet access to the camera, follow the procedures below. When you are using a router that supports UPnP™ 1. Enable the Auto Port Forwarding feature on the UPnP page (see page 67) 2. Register with the DynamicDNS service on the DynamicDNS page (see page 70) 3. Confirm that the camera can be accessed from the Internet (see page 13). If you cannot access the camera, see page 10 of the Troubleshooting on the CD-ROM. • When you are using a router that does not support UPnP™ Follow the procedures shown on page 68. 185
![](/manual_guide/products/panasonic-bbhcm381a-proline-network-cam-9b97b2f/185.png)
Operating Instructions
185
Note
•
See page 17 for the Single Camera page.
•
If you will enable Internet access to the camera, follow the procedures
below.
•
When you are using a router that supports UPnP™
1.
Enable the Auto Port Forwarding feature on the UPnP page (see page
67)
2.
Register with the DynamicDNS service on the DynamicDNS page
(see page 70)
3.
Confirm that the camera can be accessed from the Internet (see page
13). If you cannot access the camera, see page 10 of the
Troubleshooting on the CD-ROM.
•
When you are using a router that does not support UPnP™
Follow the procedures shown on page 68.