Panasonic BB-HCE481A Pro-line Network Cam - Page 31
Registering a Preset Position
UPC - 037988845095
View all Panasonic BB-HCE481A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Operating Instructions Registering a Preset Position 20 camera positions can be stored as presets. These positions can be changed (see page 33). • Registered buttons are shown in blue. • Unregistered buttons are shown in white. 1. Click [Program]. • [Program] switches to [Cancel]. Click [Cancel] to quit without saving changes. 2. Pan and tilt the camera to a desired position. 3. Zoom to the desired position. 4. Adjust the focusing if necessary. 5. Select a preset button (1-8) or a preset position (1-20) from dropdown list, and enter the preset name. E.g.: Setting "UpperLeft" for the preset 1. When selecting a preset button (1- 8), enter the preset name. • Maximum 15 characters. • Enter ASCII characters (see page 190) or characters in each language. Note that [Space and [>] are not available. 6. Click [Save] to register, or click [Back] and [Cancel] to cancel. • If "Success!" is displayed, the position has been registered successfully. Click [Back]. Note • When registering preset positions, the camera also saves brightness and white balance settings. • Only an administrator can register preset positions. Pan/Tilt Zoom Focus Preset Position Preset number Setting a name Preset Name Preset (1) Name UpperLeft Save Back The button turns blue. Only buttons 1 to 8 are displayed. The preset number and preset name are displayed. 31