Panasonic BB-HCE481A Pro-line Network Cam - Page 55
FTP: 20 and 21, Telnet: 23, SMTP: 25, DNS: 53
UPC - 037988845095
View all Panasonic BB-HCE481A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Operating Instructions Setting Allow Access from • the Internet Port Number (Static • Only) • • • IP address • (Static Only) • Default Gateway • (Static Only) • DNS Server • Address • • Description If [Yes] is selected for Allow Access from the Internet, you can access the camera from the Internet. If [No] is selected, the camera can be accessed only from a LAN that has an same IPv6 prefix as the camera. The default port number is 80. A unique port number must be set for each terminal on your network. Do not set the following port numbers. FTP: 20 and 21, Telnet: 23, SMTP: 25, DNS: 53, POP3: 110, HTTPS: 443, ICQ: 4000 and IRC: 6661- 6667. Enter a number between 1-65535. Some ISPs do not allow you to use port 80. Ask your ISP or network administrator about which port numbers are accessible over the Internet. Enter a global address. You do not need to enter a prefix length. An IPv6 address consists of 8 hexadecimal numbers divided by ":". Consecutive 0s can be abbreviated as "::". (E.g. 2001:2:3:4::5) If you have been assigned a Default Gateway IPv6 address by your ISP or network administrator, enter it in this data field. An IPv6 address consists of 8 hexadecimal numbers divided by ":". Consecutive 0s can be abbreviated as "::". (E.g. 2001:2:3:4::5) The DNS server address is required in the following situations: - Transferring camera images by E-mail or FTP - Setting cameras by their host names on the Multi-Camera Setup page - Using the DynamicDNS service - Using the alarm log notification If you have been assigned a DNS server IPv6 addresses by your ISP or network administrator, enter them in this data field. There are usually two addresses. An IPv6 address consists of 8 hexadecimal numbers divided by ":". Consecutive 0s can be abbreviated as "::". (E.g. 2001:2:3:4::5) 55