Panasonic CF-30QAP04AM Reference Manual - Page 15
Battery Power, Battery Indicator
UPC - 092281897707
View all Panasonic CF-30QAP04AM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Battery Power 15 Battery Indicator Battery indicators: Main battery pack, Second battery pack Battery indicator Battery status Not lit The battery pack is not inserted or not being charged. Orange Charging is in progress. Green The battery is fully-charged. Blinking green*1 In high temperature mode, the battery pack is discharging the power to 80%*2 of normal temperature mode ( page 17). Do not remove the battery pack in this status. Red The remaining battery is approximately 9% or less. Blinking red The battery pack or the charging circuit is not operating properly. Blinking orange The battery cannot be charged temporarily due to the following reasons: • Its internal temperature is out of the acceptable range. • The power supply is not enough because software applications or peripheral devices are consuming a large amount of power. Blinking green and orange alternately The temperature is low and the computer is warming up to prevent the hard disk drive from malfunctioning. The computer will start automatically after warming-up. Blinking orange slowly When you set [Battery Charging Indicator] to [Flashing] on the [Main Menu] of [Setup Utility]. *1 Only for the main battery pack. *2 In high temperature mode, the 100% battery level is equivalent to 80% level of the normal temperature mode. NOTE Once the battery is fully charged, the computer performs recharging only when the battery level becomes less than approximately 95%, so overcharging is avoided. When [LED] is set to [OFF] on the [Concealed Mode Configuration] menu, LED disappears ( page 72).