Panasonic CF-30QAP04AM Reference Manual - Page 85
When all the hardware has been checked, confirm the diagnostic check results., close, or press
![]() |
UPC - 092281897707
View all Panasonic CF-30QAP04AM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Hardware Diagnostics 85 NOTE Using the following procedure, you can run a diagnostic check on a specified hardware component, or run an extended diagnostic check on the memory or the hard disk (The extended diagnostic check is only for the memory and the hard disk). The extended diagnostic check is more detailed, and so requires a longer period of time to run. A Click to stop the diagnostic check. B B Click the icon for the hardware that is not to be checked, so that the icon is displayed in gray (B). e.g. hard disk When running a check on the memory or the hard disk, clicking the icon once will turn on the extended diagnostic check ("FULL" (C) will be displayed below the icon); click again, and the icon will be displayed in gray (D). C Click to start the diagnostic check. C D 6 When all the hardware has been checked, confirm the diagnostic check results. If the display is red and the message "Check Result TEST FAILED" is displayed, you can assume that there is a problem with the computer's hardware. Confirm which hardware component is displayed as red, and contact Panasonic Technical Support. If the display is green and the message "Check Result TEST PASSED" is displayed, the computer's hardware is operating normally. Continue using the computer as it is. If the computer still does not operate properly, reinstall the software (⇒ OPERATING INSTRUCTIONS "Reinstalling Software"). NOTE If you run a memory diagnostic check after installing a new RAM module (sold separately) and the message "Check Result TEST FAILED" is displayed: Remove the additional RAM module and run the diagnostic check again. If the message "Check Result TEST FAILED" is still displayed, you can assume that there is a problem with the internal RAM module. 7 After the diagnostic check is complete, click (close), or press Ctrl + Alt + Del to restart the computer.
![](/manual_guide/products/panasonic-cf30qap04am-reference-manual-38e767d/85.png)