Panasonic CF-30QAP04AM Reference Manual - Page 94
Connecting Peripherals
![]() |
UPC - 092281897707
View all Panasonic CF-30QAP04AM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Troubleshooting (Advanced) 94 Connecting Peripherals A peripheral device does not work. The connected mouse does not work. USB floppy disk drive does not work as a boot drive. The RAM module is not recognized. Install the driver. Contact the manufacturer of the device. When operation resumes from standby or hibernation, devices such as a mouse, modem and cards may not function properly. In this case, restart the computer or reinitialize the device. When is displayed in the Device Manager, remove and insert the device. If the problem persists, restart the computer. When you set [USB Port] to [Disabled] in the [Advanced] menu of the Setup Utility ( page 75), USB ports of port replicator are also disabled. The computer may not recognize the connection/removal of some devices, or may not operate normally with some devices. A Click [start] - [Control Panel] - [Performance and Maintenance] - [System] [Hardware] - [Device Manager]. B Select the device and remove the check mark for [Allow the computer to turn off this device to save power.] in [Power Management]. (This item may be unavailable for some types of devices.) In the case that a USB device does not work, remove the USB device and connect it again or connect the USB device to another port. Check the mouse connection. Install the driver compatible with the connected mouse. If the mouse does not work even after installing the driver, set [Touch Pad] to [Disabled] in the [Main] menu of the Setup Utility ( page 71). You can use only the Panasonic CF-VFDU03U USB floppy disk drive (optional). Connect the floppy disk drive directly to a USB port of the computer. Do not connect it via a USB hub or USB connector of the port replicator. If you have connected to a USB port on the computer, try connecting it to one of the other USB ports. Set [USB Port] and [Legacy USB Support] to [Enabled] in the [Advanced] menu of the Setup Utility ( page 75). Set [Boot Option #1] to [USB Floppy Disk] in the [Boot] menu of the Setup Utility ( page 76). Turn off the computer and connect the USB floppy disk drive, and then restart the computer. Insert the RAM module correctly. Use the compatible RAM module ( page 31). Check the [Information] menu in the Setup Utility ( page 70). If the RAM module is not recognized, turn off the computer and reinsert the RAM module.
![](/manual_guide/products/panasonic-cf30qap04am-reference-manual-38e767d/94.png)