Panasonic DMCFZ60 DMCFZ200 User Guide - Page 213
LCD monitor/Viewfinder, The LCD monitor/Viewfinder becomes darker or brighter for a moment.
View all Panasonic DMCFZ60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 213 highlights
Others Recording by [Panorama Shot] is ended before finishing. • If the camera is moved too slowly, the camera has assumed that camera motion was stopped and will end the still picture recording. • If there is a great deal of shaking towards the recording direction while moving the camera, recording will end. > When recording with [Panorama Shot], move the camera by trying to trace a small circle parallel to the recording direction at a speed of about 8 seconds per revolution (estimated). Lens Recorded image may be warped, or nonexistent color is surrounding the subject. • It is possible that the subject may be warped slightly, or the borders get colored, depending on the zoom magnification, due to the characteristics of the lens. Also, the peripherals of the image might look warped because the perspective is enhanced when the wide angle is used. This is not a malfunction. LCD monitor/Viewfinder The LCD monitor/Viewfinder becomes darker or brighter for a moment. • This phenomenon appears when you press the shutter button halfway to set the aperture value and does not affect the recorded pictures. • This phenomenon also appears when the brightness changes when the camera is zoomed or when the camera is moved. This is because of operation of the automatic aperture of the camera, and it is not a malfunction. The LCD monitor flickers indoors. • The LCD monitor may flicker for a few seconds after this unit is turned on. This is an operation to correct flicker caused by lighting such as fluorescent lights, LED lights etc. and is not a malfunction. The LCD monitor/Viewfinder is too bright or dark. • Check [LCD Mode] setting. (P58) • Perform [LCD Display]/[Viewfinder]. (P58) The picture is not displayed on the LCD monitor. • Does the picture appear on the Viewfinder? > Press [EVF/LCD] button to switch to LCD monitor display. Black, red, blue and green dots appear on the LCD monitor. • This is not a malfunction. These pixels do not affect the recorded pictures. - 213 -