Panasonic DMREH60 DMREH60 User Guide - Page 59
REFERENCE, MESSAGES, On the television, On the unit's display
![]() |
View all Panasonic DMREH60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Messages On the television Cannot finish recording completely. Cannot play. Cannot record on the disc. Unable to format. Please check the disc. Cannot play back on this DVDRecorder. Cannot record. Disc is full. Cannot record. The number of titles has exceeded the maximum limit. Error has occurred. Please press ENTER. No disc No folders. No SD Card No valid SD card. There is not enough free space on dubbing destination. Please change the disc. This is a non-recordable disc. This disc is not formatted properly. $ ≥The program was copy-protected. ≥The HDD or disc may be full. ≥The maximum number of times you can record the program is exceeded. ≥You inserted an incompatible disc (Discs recorded in PAL video, etc.). ≥The disc may be dirty or scratched. ≥You tried to play a non-compatible image. ≥Turn the unit off and re-insert the card. ≥[HDD] [RAM] Create space by erasing any unnecessary titles. [Even if you erase recorded content from the DVD-R or +R, there is no increase in disc space. Available disc space on DVD-RW (DVD-Video format) increases only when the last recorded title is erased.] ≥Use a new disc. ≥Press [ENTER] to start recovery process. You cannot operate the unit while it is recovering ("SELF CHECK" appears on the unit's display). ≥The disc may be upside down. ≥There is no compatible folder in this unit. ≥The card is not inserted. If this message is displayed with a compatible card already inserted, turn off the unit, remove and then re-insert the card. ≥The card inserted is not compatible or the card format does not match. ≥Create space by erasing any unnecessary items. ≥Erase one or more items registered on the transfer (dubbing) list to ensure that the "Current capacity" is not exceeded. ≥There may be a problem with the disc. Press [< OPEN/CLOSE] on the main unit to remove it and check it for scratches or dirt. (The unit turns off automatically after you open the tray.) ≥The unit cannot record on the disc you inserted. Insert a DVD-RAM or unfinalized DVD-R, DVD-RW (DVD-Video format) or +R. ≥You inserted an unformatted DVD-RAM or DVD-RW. ≥The operation is prohibited by the unit or disc. Page - - - - 5 35 5 32, 39, 51 - - - 9 5 9 32, 35, 39, 42, 51 45, 49 5 8, 9 51 - On the unit's display The following messages or service numbers appear on the unit's display when something unusual is detected during startup and use. CHK REMOTE ≥The remote control and main unit are using different codes. Change the code on the 19 ("∑" stands for a number.) remote control. Press and hold [ENTER] and the indicated number button at the same time for more than 2 seconds. HARD ERR HDD SLP NO READ PLEASE WAIT SELF CHECK UNFORMAT UNSUPPORT U59 U99 Hor F R e.g., R44:00) ≥If there is no change after turning the unit on and off, consult the dealer where the unit was purchased. ≥In order to extend HDD life, the HDD is in SLEEP mode. Press [HDD] to activate. ≥The disc is dirty or badly scratched. The unit cannot record, play, or edit. ≥You have used a DVD lens cleaner and it has finished. Press [< OPEN/CLOSE] on the main unit to eject the disc. ≥Displayed when the unit is started. This is not a malfunction. ≥The unit is carrying out its recovery process. You cannot operate the unit while "PLEASE WAIT" is displayed. ≥There was something unusual detected with the disc while recording, playing or transferring(dubbing), there was a power failure or the AC plug was disconnected while the unit was on. The unit is carrying out its recovery process. This process restores the unit to normal operation. The unit is not broken. Wait until the message disappears. ≥You inserted an unformatted DVD-RAM or a DVD-RW that is unformatted or recorded on other equipment. ≥You have inserted a disc the unit cannot play or record on. ≥The unit is hot. The unit switches to standby for safety reasons. Wait for about 30 minutes until the message disappears. Select a position with good ventilation when installing the unit. Do not block the cooling fan on the rear of the unit. ≥The unit fails to operate properly. Press [POWER Í/I] on the main unit to switch the unit to standby. Now press [POWER Í/I] on the main unit again to turn the unit on. ≥There is something unusual. (The service number displayed after H and F depends on the unit's condition.) ≥Check the unit using the troubleshooting guide. If the service number does not disappear, do the following. 1. Disconnect the plug from the AC outlet, wait a few seconds, then reconnect it. 2. Press [POWER Í/I] to turn the power on. (The unit may be fixed.) If the service number does not disappear despite doing the above, request service from the dealer. Inform the dealer of the service number when requesting service. ≥The unit is showing you the remaining time on the HDD or the disc. (This does not indicate a malfunction.) In the display across the letter "R" means "Remain" and the numbers mean remaining time (hours:minutes). - 4 5 5 - - 62 - 8, 9 - - - 62-66 20 Reference RQT8307 59
![](/manual_guide/products/panasonic-dmreh60-dmreh60-user-guide-71d3f00/59.png)