Panasonic KX-FL521 Laser Fax - Page 57
Other remote operations, Returning to TAD/FAX mode
UPC - 037988809158
View all Panasonic KX-FL521 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Remote Operation Other remote operations s Erasing a specific message Press 4 while listening to the message you want to erase. Voice guide example: The message has been erased. qA long beep will also sound. The unit will then play back the next message. s Erasing all the messages Press 5 to erase all the messages. All messages have been erased. qA long beep will also sound. s Turning the message transfer on or off You must pre-program a transfer telephone number beforehand (feature #60 on page 66). Press 8 1 to turn ON the message transfer. Message transfer is set. Transfer phone number is 123···. Press 8 2 to turn OFF the message transfer. Message transfer is off. qIf a transfer telephone number is not programmed, you cannot turn this feature ON. Transfer phone number is not set. s Monitoring the room Press 6 to monitor the sound for about 30 seconds in the room where the unit is installed. qAfter 30 seconds, a beep sounds. To continue monitoring, press 6 again within 10 seconds. s Recording a marker message You can leave an additional message. 1. Wait for the voice guide. All messages have been played. 2. Wait about 10 seconds. Please leave your name and message after the beep. 3. Leave a message after the beep. s Turning the pager call on or off You must program a pager number beforehand (feature #70 on page 47). Press 8 3 to turn ON the pager call. Pager call is set. Pager number is 098765432. Press 8 4 to turn OFF the pager call. Pager call is off. qIf a pager number is not programmed, you cannot turn this feature ON. Pager number is not set. s Re-recording a greeting message You can change the contents of the TAD/FAX greeting message. 1. Press 7 to start recording. qA long beep will sound. 2. Speak clearly up to 16 seconds. qIf you pause for over 2 seconds, 6 beeps will sound and the recording will stop. Repeat from step 1 within 10 seconds. 3. When finished recording, press 9 . qThe new greeting message will be played. s Skipping the greeting message Press 0 during the greeting message playback. qThe unit will skip the rest of the greeting message. s Changing the receive mode Press 8 0 to change the receive mode from TAD/FAX to TEL. qYou cannot return to TAD/FAX mode in the same call. To return to TAD/FAX mode, see below. s Returning to TAD/FAX mode 1. Call your unit and wait for 10 rings. qThe answering device will temporarily answer the call. 2. Enter the remote operation ID during the greeting message. qYour unit will switch to TAD/FAX mode. 57