Panasonic P2 HD Camcorder Operating Instructions - Page 107

Adjustments and Settings for Recording If the following messages are displayed when the JOG dial button is pressed, the data cannot be deleted. Error message Measures DELETE NG Insert an SD memory card. NO CARD (No SD memory card is inserted) DELETE NG ERROR (Data cannot be deleted) It is assumed that the SD memory card is defective. Replace the card. DELETE NG Eject the SD memory card and WRITE PROTECT release write protection. (The SD card is write protected) DELETE NG CANNOT ACCESS (It is impossible to access the data) It is impossible to access the SD memory card while the card is in use. After completion of the respective operations, perform the read operation again. DELETE NG NO FILE (No file is available) Select the FILE NO. containing astigmatism files and perform the delete operation. 7 Move the arrow (cursor) to YES by turning the JOG dial button and then press the JOG dial button. When the write operation is completed, the following message is displayed. When CAC FILE does not operate properly The following error messages are displayed in the viewfinder when CAC does not operate properly or CAC files cannot be read properly. Error message Meanings Measures FILE MEMORY FULL When the CAC FILE is Read the CAC FILE in read from the SD a mode other than memory card to EMPTY mode. memory in the unit in EMPTY mode, the built-in memory is full. CAC FILE DATA NOT FOUND When the CAC function is set to ON and no CAC FILE applicable to the connected lens is available. This is Read the CAC FILE that is applicable for the lens to be used. displayed when the power of the unit is turned on. When the unit cannot This lens does not CAC LENS DATA INVALID respond to the return data from the lens, or when any responses other than ones as defined in the CAC FILE are returned. support CAC correction. Although it cannot execute CAC correction, using this lens presents no problems. Initialization of the lens Turn the focus/zoom LENS INITIALIZE position detection NOT (focus/zoom) in the COMPLETED encoder type is not completed yet. ring to through the intermediate point of the operation range. DELETE OK ˗ Notes z When lens optical accessories (converter lens, attachment) are installed, the CAC may not operate properly due to changes in the optical characteristics of the lens. In this case, turn off the CAC function. z When focus support is used with CANON lenses, data must be recorded after initialization in the automatic initialization mode. The state where the focus ring is moving may be recorded. z When the CAC does not operate and no error message is displayed, the version of the software for the lens may be out of date and invalid. Please contact the lens manufacturer. 107 Adjustments and Settings for Recording : Chromatic Aberration Compensation (CAC)