Panasonic P2 HD Camcorder Operating Instructions - Page 154

154

Maintenance and Inspections: Warning System

5. Image Sequence Error

Display window

indication

“E-40” appears in the time code display field.

WARNING lamp

Blinks 4 times per second.

Tally lamp

Blinks 4 times per second while recording

continues.

Viewfinder

The REC WARNING indicator lights up.

Warning tone

Beeps 4 times per second.

Warning

description

There are abnormal conditions in the image

sequence of the 24P, 30P, or 25P mode.

Recording/

playback

operation

Images can be recorded and played back,

but some frames may be dropped or the

sequences of TC and UB may shift.

Countermeasures

Confirm the recording/playback operation

after turning OFF the power supply once and

then turning it on again. If the error is not

corrected after executing this procedure,

contact the dealer.

6. Corruption of Standard Signal

Display window

indication

“E-40” appears in the time code display field.

WARNING lamp


Tally lamp


Viewfinder

The TEMPORARY PAUSE indicator lights up.

Warning tone

Beeps 4 times per second while recording

continues.

Warning

description

Corruption in the input signals from the

standard GENLOCK IN and SDI IN

connectors means correct recording is not

possible, and this has stopped. The clip will

be divided.

Recording/

playback

operation

When the signal returns to normal, recording

will automatically start again. However, this

will not automatically start when in

INTERVAL REC mode or LOOP REC mode.

Countermeasures

Please check the input signal from the

GENLOCK IN connector or SDI IN connector.

If errors continue, please contact your dealer.

7. Recording Error

Display window

indication

“00:00:00:11” appears in the time code display

field. Even after recording is stopped, this

display continues to blink until the next

operation is performed.

WARNING lamp


continues.

Tally lamp


continues.

Viewfinder

The REC WARNING indicator lights up.

Warning tone


continues.

Warning

description

This indicates a failure either in the P2 card

recording or the recording circuit.

Recording/

playback

operation

The recording may stop or continue.

Countermeasures

Restart recording. Or, turn the power OFF and

turn it ON again, before starting recording. If

the recording cannot be performed normally,

change the P2 card.

8. Number of Clips Exceeded

Display window

indication

“00:00:00:11” appears in the time code display

field. Even after recording is stopped, this

display continues to blink until the next

operation is performed.

WARNING lamp


continues.

Tally lamp


continues.

Viewfinder

The OVER MAX# CLIPS indicator lights up.

Warning tone


continues.

Warning

description

This is displayed when attempting to record

clips where the total quantity exceeds the

upper limit (1000 pieces) for a single P2 card.

Recording/

playback

operation

Cannot record. Stops while recording.

Countermeasures

Insert a new P2 card or delete the

unwanted

clips in the P2 card.

9. Low Wireless Signal Reception

Display window

indication

No display.

WARNING lamp

Blinks 4 times per second. (During pause and

recording)

Tally lamp


continues.

Viewfinder

The WIRELESS RF indicator lights up while

recording continues.

Warning tone


continues.

Warning

description

This error indicates poor wireless audio

reception conditions.

Recording/

playback

operation

Continues to operate without receiving the

wireless microphone signal.

Countermeasures

Check the microphone power supply and the

reception status of the wireless receiver.

10. Battery Nearly Empty

Display window

indication

One of the bars in the battery remaining

indicator starts blinking.

WARNING lamp

Blinks once per second.

Tally lamp

Blinks once per second.

Viewfinder

The BATT LED blinks.

Warning tone

Beeps 4 times per second.

Warning

description

The battery is about to run out.

Recording/

playback

operation

Continues to operate.

Countermeasures

Replace the battery as required.

Section	Page
Read this first!	2
General	8
Features of Camera unit	9
Features of Recorder/player unit	10
Features of the Input/Output unit	12
Other features	12
Dimensions drawing	13
Color TV Standard Settings (Settings for frame frequency)	14
System Configuration	15
Parts and their Functions	16
Power Supply and Accessory Mounting Section	16
Audio (input) Function Section	18
Audio (output) Function Section	20
Shooting and Recording/Playback Functions Section	21
Menu Operation Section	25
Time Code Section	26
Warning and Status Display Functions	27
Display Window Functions	28
LCD Monitor	29
Viewfinder	30
Recording and Playback	32
P2 Cards	32
How to handle data recorded on P2 cards	34
Basic Procedures	35
Normal Recording	37
Normal Recording and Native Recording	37
PRE-RECORDING function	38
Loop Recording	39
Interval Recording	39
ONE CLIP REC Function	42
Recording Review Function	44
Normal and Variable Speed Playback	45
Text Memo Function	45
Shot Mark Function	46
Recording Setting and Operation Mode	46
Adjustments and Settings for Recording	47
Multi Format	47
Video system and Recording format	47
Selecting a recording signal and method	47
Recording formats and output connector signal formats	48
Adjusting the White balance and Black Balance	49
Adjusting the White Balance	49
Setting Color Temperature Manually	51
Adjusting the Black Balance	52
Setting the Electronic Shutter	53
Shutter Modes	53
Setting the Shutter Mode and Speed	54
Placing the Camera-recorder in SYNCHRO SCAN Mode	54
Assigning Functions to USER Buttons	55
Setting the Switchover of USER SW GAIN	56
Selecting Audio Input Signals and Adjusting Recording Levels	57
Selecting Audio Input Signals	57
Recording level adjustment	58
Setting External Reference Signal and GENLOCK	61
Locking video signal to external reference signal	61
Setting Time Data	62
Description of time data	62
Recording time code and user bits	63
Setting of the User bits	64
Setting the Internal Clock’s Date and Time	66
Setting the Time Code	67
Externally Locking the Time Code	68
Providing an ID to the Camera	72
Setting UMID Information	73
CTL Count Setting and Display	74
Viewfinder Screen Status Displays	75
Lamps in the Viewfinder Screen	75
Mode Check Screen Displays (MODE CHK function)	75
Selecting Viewfinder Display Information	76
Viewfinder Status Indication Layout	76
Display Modes and Setting Changes/adjustment Result Messages	85
Setting the Marker Displays	86
Marker Check Screen Displays (MARKER SELECT button function)	86
Checking Return Video Signal in the Viewfinder	86
Adjusting and setting the LCD monitor	87
Selection of video output signals	88
Settings of signals output from SDI OUT connector	88
Settings of signals output from MON OUT connector	89
Handling data	90
Handling SD memory cards	91
Formatting, Writing and Reading an SD memory card	91
How to Use the User Data	95
How to Use Scene File Data	96
Resetting Menu Option Settings to Defaults	99
Lens file	99
How to provide lens files	99
To save the lens file into the built-in memory	100
To read the lens file from the builtin memory	101
To write in and read out the lens file to/from the SD memory card	102
Chromatic Aberration Compensation (CAC)	104
Preparation	108
Power Supply	108
Mounting the Battery and Setting the Battery Type	109
Use of the external DC power supply	110
Mounting the Lens and Performing the Flange Back and White Shading Adjustments	111
Preparing for Audio Input	114
When Using the Front Microphone	114
When Using a Wireless Receiver	114
When Using Audio Devices	115
Mounting the Camera on a Tripod	115
Attaching the Shoulder Strap	116
Attaching the Rain Cover	116
Attaching the F.AUDIO LEVEL control Knob	117
Connection of the DC OUT connector and the external REC strat/stop switch	117
Manipulating Clips with Thumbnails	118
Thumbnail Manipulations Overview	118
Thumbnail Screen	119
Selecting Thumbnails	121
Playing back Clips	121
Switching the Thumbnail Display	122
Changing Thumbnails	123
Shot Mark	123
Text Memo	124
Deleting Clips	126
Restoring Clips	126
Reconnection of Incomplete Clips	127
Copying Clips	127
Setting of Clip Meta Data	128
Formatting a P2 Card	131
Formatting SD memory cards	131
Setting the Thumbnail Display Mode	132
Properties	133
Connection with external device	136
Connection with external devices using the USB 2.0 port	136
Connection with a PC in the USB DEVICE mode	136
USB HOST mode	137
Switching to the USB HOST mode	137
Using the USB HOST mode	137
Connection using the SDI IN connector	142
Connection of the remote control unit (AJ-RC10G)	143
Connection of the extension control unit (AG-EC4G)	145
Maintenance and Inspections	146
Inspections Before Shooting	146
Preparing for Inspections	146
Inspecting the Camera Unit	146
Inspecting the Memory Recording Functions	147
Maintenance	148
Cleaning Inside the Viewfinder	148
Phenomenon Inherent to CCD Cameras	148
Replacing the Backup Battery	148
Connector Signals	149
Warning System	153
Warning Description Tables	153
Error Codes	155
Card Warning Code	156
Warning and Error Display for Thumbnail Operation and USB HOST MODE	156
Menu	158
Menu Configuration	158
Setting Menu Options	160
Selecting Options for USER MENU	161
Menu Description Tables	162
SYSTEM SETTING	162
PAINT	169
VF	177
CAM OPERATION	181
MAIN OPERATION	187
FILE	193
MAINTENANCE	196
OPTION MENU	198
Updating the Firmware incorporated into the unit	199
Specifications	200

Panasonic P2 HD Camcorder Operating Instructions - Page 154

Image Sequence Error, Corruption of Standard Signal, Recording Error, Number of Clips Exceeded

Page 154 highlights