Panasonic P2 HD Camcorder Operating Instructions - Page 130
Notes, Selecting the USER CLIP NAME recording, method, Clear the uploaded metadata
![]() |
View all Panasonic P2 HD Camcorder manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
Selecting the USER CLIP NAME recording method Select META DATA > USER CLIP NAME from the thumbnail menu to select the recording method. Two options are available: TYPE1 and TYPE2. z TYPE1 (Factory setting) USER CLIP NAME to be recorded If clip metadata has been read in Uploaded data If no clip metadata has been read in or if the setting for recording clip metadata has been turned off Same as GLOBAL CLIP ID (UMID data) z TYPE2 USER CLIP NAME to be recorded If clip metadata has been read in Uploaded data + COUNT value* If no clip metadata has been read in or if the setting for recording Same as CLIP NAME clip metadata has been turned off * The COUNT value is indicated as a four-digit number. The COUNT value is incremented each time a new clip is captured if clip metadata has been read in and TYPE2 has been selected as the recording method. The COUNT value can be reset using the following procedure. Select META DATA > PROPERTY from the thumbnail menu, then select USER CLIP NAME to display the menu shown below. Select "COUNT RESET" with the cursor and press the SET button to reset the COUNT value to 1. Example of recording (DVCPRO HD) a clip on one P2 card: REC start Recording pause Recording duration = Approx. 7 min. Clip 1 COUNT value = 0001 5 min. Clip 2 COUNT value = 0002 2 min. Example of recording a clip on two P2 cards: REC start Recording pause Clip 1 COUNT value = 0003 1st card Clip 2 COUNT value = 0004 2nd card If the clip thumbnails are displayed as shown in the example above or their properties are indicated using a P2 device, the thumbnail and COUNT value of clip 1 will be displayed. Clear the uploaded metadata Select META DATA > INITIALIZE from the thumbnail menu, and press the SET button. Select "YES" when the confirmation screen is displayed. Notes z Japanese or Chinese characters indicated in English or other characters that cannot be indicated in English will not display properly; they will be indicated as ¢. z The letters which can be input with AJ-HPX3100 are only the alphanumeric. AJ-HPX3100 cannot input Japanese and Chinese. Note When a P2 card with a memory capacity of 8 GB or more is used in camera-recorder and a one-time continuous recording exceeds the prescribed duration (DVCPRO HD and the AVCIntra 100: about 5 minutes; DVCPRO50 and the AVC-Intra 50: about 10 minutes; DVCPRO or for DV: about 20 minutes) or when a one-time recording extends over more than one P2 card, the recording concerned will automatically be undertaken as a separate clip. At this time, each clip will be provided with its own COUNT value. 130 Manipulating Clips with Thumbnails: Thumbnail Manipulations Overview
![](/manual_guide/products/panasonic-ajhpx3100gj-operating-instructions-8e5f8de/130.png)