Panasonic P2 HD Camcorder Operating Instructions - Page 77
Information Item, Indication, Status, Adjustments and Settings for Recording
View all Panasonic P2 HD Camcorder manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Adjustments and Settings for Recording Information Item 1. System mode 2. Camera mode Indication 1080-59.9i 1080-50i 480-59.9i 576-50i 60i 30P 24P 24PA 50i 25P 3. REC FORMAT 4. Shutter speed/mode 5. P2 card remaining free space AVC-I 100 AVC-I 50 DVCPRO HD DVCPRO50 DVCPRO DV 11/¢¢.¢/1¢¢¢.¢d 1/60 (1/100) - 1/2000, HALF, ¢¢¢.¢d ¢¢¢min END WP LOOP INFO P2 ¢/¢ 6. P2 card remaining free space (MODE CHECK) [1] ¢¢¢min 7. Camera-recorder REC REC indication 8. Battery type (MODE CHECK) 9. Battery remaining level/voltage DIONIC90 - AC ADPT ¢¢.¢V ¢¢¢% EMP MAX Status This indicates the mode that the unit operates in. 1080-59.94 interlace mode 1080-50 interlace mode 480-59.94 interlace mode 576-50 interlace mode This indicates the video system when signals output from CCD are recorded on a P2 card or output as video signals. 1080-59.94i or 480-59.94i 1080-29.97P or 480-29.97P 1080-23.98P or 480-23.98P (2-3 Pull-down) 1080-23.98P or 480-23.98P (2-3-3-2 Pull-down) 1080-50i or 576-50i 1080-25P or 576-25P Note In AVC-Intra format, it becomes Native recording for 30P, 24P, and 25P. This indicates the recording mode. This indicates that the shutter speed is set to SYNCHRO SCAN. This indicates that a fixed shutter speed has been set. The indication "¢¢¢min" stays illuminated under normal conditions or blinks when the remaining level is near zero. When the card space is used up, "END" blinks. The P2 card is write-protected. The camera-recorder is in LOOP REC mode. When loop recording cannot be performed, for example because the P2 card has no free space, the indication blinks. P2 card being recognised. Total free space/capacities of the P2 cards (when MODE CHECK is being performed). Note When the menu item P2 CARD REMAIN is set to "ONE CARD", the number of the P2 card slot that contains the target card is indicated, together with the remaining space. The menu item P2 CARD REMAIN is found in the screen on the VF page. > [P2 Card Remaining Free Space/capacity Indication] (page 83). The number of the P2 card slot that contains the target card and the remaining free space (when MODE CHECK is being performed) are indicated. This item displays the estimated recording time (Refer to [Loop Recording] (page 39)) when in LOOP REC mode. This indication also appears when the target P2 card has been switched with a user button. This is displayed when the menu item REC TALLY of the is set to "CHAR". The menu item REC TALLY is found in the screen on the SYSTEM SETTING page. This is displayed when the menu item REC STATUS is set to "ON". The menu item REC TALLY is found in the screen on the VF page. Battery type, selected through a menu option. "AC ADPT" indicates when an external DC power supply has been input. Battery remaining level in tenths of a volt The remaining battery level is indicated in percentage. This indicates that the battery level is empty. This indicates the battery is fully charged. 77 Adjustments and Settings for Recording : Viewfinder Screen Status Displays