Panasonic P2 HD Camcorder Operating Instructions - Page 164
One Shot, Example Of Drop-frame, Rec Time, Pause Time, Take Total Time, Total Rec Time, Rec Function
View all Panasonic P2 HD Camcorder manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 164 highlights
REC FUNCTION Items/ Adjustable Data Saved Range Remarks INTERVAL REC MODE OFF ON ONE SHOT -CUF - Sets INTERVAL REC function. OFF: INTERVAL REC is not performed. ON: Uses internal memory to perform interval recording. ONE SHOT: Performs "one-shot" recording for the duration specified under REC TIME, and then stops. Note This item cannot be changed when "ON" is selected for the LOOP REC MODE item or for the ONE CLIP REC MODE item. In addition, this does not work in Native mode or in 24P and 24PA modes. INTERVAL ON REC HOLD OFF -CUF - Selects whether INTERVAL REC MODE settings are retained or not when the power is turned off once. ON: Retain OFF: Do not retain. The INTERVAL REC MODE is OFF whenever the power is turned on again. REC TIME * 00s01f : 59s29f -CUF - Set REC TIME (1 cut). Note However, the settings can be made frame by frame, and the numbers of the cut-off unit frames for the shortest time period and the set time on the actual operation may vary with the recording method. For details, refer to [Interval Recording] (page 39). PAUSE TIME * 00h00m00s01f Specify PAUSE time for recording. : Note 00h04m59s29f However the settings can be made frame : by frame, and the numbers of the cut-off 23h59m59s29f unit frames for the shortest time period and the set time on the actual operation may vary with the recording method. For details, refer to [Interval Recording] (page -CUF - 39). TAKE TOTAL NONE TIME : - C U F - 5day Specify the time needed for shooting. Select from NONE (continue until operation is manually stopped) to 5 days. TOTAL REC 00m00s01f Display total recorded time. The setting TIME * : cannot be changed using this option. 99m59s29f Displays the recording time (recording OVER100min time needed for the P2 card) calculated NONE using REC TIME, PAUSE TIME, and TAKE TOTAL TIME. Note ----- A value based on actual processing is displayed. START DELAY 0SEC Set the delay after pressing REC button : to start recording in INTERVAL REC. - C U F - 10SEC PRE REC ON MODE OFF -CUF - Select whether or not to enable PRE- RECORDING. ON: PRE-RECORDING enabled. OFF: PRE-RECORDING disabled. Note Specify the PRE-RECORDING time by using the menu option PRE REC TIME. * This variable range is the numerical values for 59.94 Hz. For 50 Hz, the frame rate is up to 24f. Items/ Adjustable Data Saved Range Remarks PRE REC TIME 1SEC : 8SEC : 15SEC Set PRE RECORDING. 1-15SEC: Set the length of time that can be retrospectively recorded before the REC button is pressed. Note When the SYSTEM MODE menu option on the SYSTEM MODE screen is set to 1080-59.94i or 1080-50i, or when it is set - CUF - to 480-59.94i or 576-50i and the REC MODE menu option is set to DVCPRO50, the upper limit of the above recording time is 8 seconds. LOOP REC ON MODE OFF Select whether or not to enable LOOP REC. This setting can be used with PRE- RECORDING features. ON: Enable LOOP REC. OFF: Disable LOOP REC. Notes z After the power is turned off, this item will default to OFF the next time the power is turned on. z This item cannot be changed in the following cases. When "ON" or "ONE SHOT" is ---F- selected for the INTERVAL REC MODE item When "ON" is selected for the ONE CLIP REC MODE item z This does not work in Native mode or in 24P and 24PA modes. REC START ALL NORMAL Select operating modes that allow recording to start. ALL: Allow recording to start during stop, recording pause, and playback. NORMAL: Allow recording to start during stop and recording pause. Note Even if this is set to "ALL", the operation is "NORMAL", when "ON" or "ONE - CUF - P.ON REC HOLD SHOT" is selected in INTERVAL REC MODE. Select the recording order of the slot SLOT SEL SLOT1 - CUF - when the power is turned on. HOLD: The recording order starts with the card previously selected when the power was turned off. SLOT1: The recording order starts with the card that is inserted in Slot 1 when the power is turned on. ˗ Note Displayed REC TIME, PAUSE TIME and TOTAL REC TIME are translated into either drop-frame or non-drop-frame according to the mode of operation. TAKE TOTAL TIME is actual time. Therefore, TOTAL REC TIME may incorporate fractions, depending on the settings. Example of drop-frame REC TIME 02s00f PAUSE TIME 02s00f TAKE TOTAL TIME 40min TOTAL REC TIME 19m59s06f 164 Menu: Menu Description Tables