Panasonic PT-EZ570U Operating Instructions - Page 50
Input menu, Input 1
View all Panasonic PT-EZ570U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Input menu Select [Input] from the Main Menu (see "Navigating through the menu" on page 47), then select the item from the sub-menu. Remote Control Side Control SVGA 1 PC Systems provided in this projector is chosen. The projector chooses a proper system provided in the projector and displays it. * Mode 1 and SVGA 1 are examples. 1111 Press ▲▼ to select [System]. 2222 Press ► or the button to access the submenu. 3333 Press ▲▼ to select the desired system. Settings Input 1 1111 Press ▲▼ to select [Input 1]. 2222 Press ► to access the submenu. 3333 Press ▲▼ to select [RGB(PC analog)], [RGB(Scart)], [DVI-D], [DVI-D(HDCP)] or [HDMI]. 4444 Press the button. JJComputer System Selection This projector automatically tunes to various types of computers with its Multi-scan system and Auto PC Adjustment. If a computer is selected as a signal source, this projector automatically detects the signal format and tunes to project a proper image without any additional settings. (Signal formats provided in this projector are shown on pages 109 -113.) Auto When the projector cannot recognize the connected signal conforming to the provided PC Systems, Auto is displayed on the System Menu box and the Auto PC adjustment function works to display proper images. If the image is not projected properly, a manual adjustment is required. - - - - There is no signal input from the computer. Check the connection between your computer and the projector. Mode 1 The preset system is manually adjusted in the PC adjust Menu. The adjusted data can be stored in Mode 1-10. Input 2 1111 Press ▲▼ to select [Input 2]. 2222 Press ► to access the submenu. 3333 Press ▲▼ to select [Video], [Y, Pb/ Cb,Pr/Cr], or [RGB]. 4444 Press the button. Input 3 1111 Press ▲▼ to select [Input 3]. 2222 Press ► to access the submenu. 3333 Press ▲▼ to select [Video], [Y, Pb/ Cb,Pr/Cr], or [S-video]. 4444 Press the button. JJVideo System Selection Video or S-video Auto The projector automatically detects an incoming video system, and adjusts itself to optimize its performance. When Video System is [PAL-M] or [PAL-N], select the system manually. PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N If the projector cannot reproduce proper video image, select a specific broadcast signal format from among [PAL], [SECAM], [NTSC], [NTSC 4.43], [PAL-M] and [PAL-N]. 50 - ENGLISH