Panasonic PT-EZ570U Operating Instructions - Page 97
Replacing the Lamp unit, the three lamp unit fixing screws until
View all Panasonic PT-EZ570U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Replacement JJ Replacing the Lamp unit CAUTION: zzWhen the projector is mounted on a ceiling, do not work with your face close to the projector. zzAttach the lamp unit and the lamp cover securely. zzWhen you experience difficulty in installing the lamp, remove it and try again. If you use force to install the lamp, the connector may be damaged. 1111 Turn off the Power by following the procedure in "Turning off the projector (Æpage 40). Unplug the AC power cord. Wait at least 1 hour and make sure the lamp unit and surroundings are cool. Lamp cover 2222 Use a Phillips screwdriver to loosen the lamp cover fixing screw and remove the lamp cover. zzRemove the lamp cover by pulling it slowly toward the direction of the arrow. 3333 Use a Phillips screwdriver to loosen the three lamp unit fixing screws until the screws turn freely. Hold the used lamp unit by its handles, and pull it gently from the projector. Lamp cover fixing screw Lamp unit fixing screws 4444 Insert the new lamp unit in correct direction. Tighten the three lamp unit fixing screws securely with a Phillips screwdriver 5555 Attach the lamp cover, and tighten the lamp cover fixing screw securely with a Phillips screwdriver. zzAttach the lamp cover by pushing it slowly opposite the direction of the arrow. Handles Note zzWhen you replace the new lamp unit (ET-LAE200), the projector resets the total usage time of the lamp unit automatically. Maintenance ENGLISH - 97