Panasonic PT-EZ570U Operating Instructions - Page 98
Troubleshooting
View all Panasonic PT-EZ570U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Troubleshooting Please check following points. For details, see the corresponding pages. Problem Cause Reference page zzThe power cord may not be connected. - zzNo electric supply is at the wall outlet. - Power does not turn zzThe circuit breakers have tripped. on. zzIs the indicator, indicator, or indicator lit or blinking? - 37, 90-93 zzThe lamp cover has not been securely installed. 97 zzThe video signal input source may not be connected to a terminal 35 properly. zzThe input selection setting may not be correct. 42 No picture appears. zzThe [Brightness] adjustment setting may be at the minimum setting. 56 zzThe input source which is connected to the projector may have a - problem. zzThe [Shutter] function may be in use. 42 zzThe lens focus may not have been set correctly. 41 zzThe projector may not be at the correct distance from the screen. 27 The picture is fuzzy. zzThe lens may be dirty. 15 zzThe projector may be tilted too much. - zzThe lens cap is still attached to the lens. 17 zz[Color] or [Tint] adjustment may be incorrect. 56 The color is pale or zzThe input source which is connected to the projector may not be - grayish. adjusted correctly. zzComputer cable is damaged. - zzThe input terminals may not have been correctly connected. 35 zzThe volume may have been set to the minimum level. 43, 62 No sound from the zzThe [Shutter] function may have been turned on. 42 internal speaker zzWhen the AUDIO OUT is plugged-in, the projector's built-in speaker is 23 not available. zzThe [Mute] function may have been turned on. zzCheck the Build-in SP function. 43, 62 62 zzThe batteries may be weak. - zzThe batteries may not have been inserted correctly. 24 zzThe remote control signal receptor on the projector may be obstructed. 19 The remote control zzThe remote control unit may be out of the operation range. 19 does not operate. zzStrong light such as fluorescent shine onto the signal receptor. 19 zzWhen different codes are set on the projector and on the remote control. 67 zzCheck if the ON/OFF switch on the remote control is set to "ON." - zzMake sure that the simple mode in the remote control function is set to [Off]. 67 The control buttons zzThe side control is not available if the side control is locked at [Key lock] 69 of the projector do under [Security] of [Setting] section. not operate. Maintenance 98 - ENGLISH