Panasonic PT-EZ570U Operating Instructions - Page 73
Network, Projector name, Network setup, Network control
View all Panasonic PT-EZ570U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Network Select [Network] from the Main Menu (see "Navigating through the menu" on page 47), then select the item from the sub-menu. Remote Control Side Control Projector name You can change the projector name to be displayed on the network. 1111 Press ▲▼ to select [Projector name]. 2222 Press the button. 3333 Press buttons to set the [Projector name]. Network setup You can make detailed wired LAN settings. 1111 Press ▲▼ to select [Network setup], and press button. 2222 Press ▲▼ to select an item, and change the setting according to the instructions. On: If a DHCP server exists in the network to which the projector is connected, the IP address will automatically be acquired. DHCP Off: If a DHCP server does not (DHCP client function) exist in the network to which the projector is connected, additionally set [IP address, [Subnet mask] and [ Default gateway]. IP address (Display of IP address Enter the IP address if DHCP and setting) server is not used. Subnet mask (Displaying and setting the subnet mask) If not using a DHCP server, enter the subnet mask Default gateway (Display of gateway address and setting) DNS1 (Display of Preferred DNS server address and setting) DNS2 (Display of Alternate DNS server address and setting) Enter the gateway address if DHCP server is not used. Enter the DNS server address if DHCP server is not used. Enter the alternate DNS server address if DHCP server is not used. 3333 Press to select [Set], and press button. zzDefault wired LAN settings The following settings are set before the projector leaves the factory. DHCP IP address Subnet mask Default gateway DNS 1/DNS 2 Off 192.168.10.100 255.255.255.0 192.168.10.1 NONE Note zzBefore using the DHCP server, make sure the DHCP server is already functioning. zzFor details of IP address, subnet mask, gateway and DNS, ask the network administrator. Network control Set when you want to control the projector from a computer connected to the network. 1111 Press ▲▼ to select [Network control]. 2222 Press ► or the button to access the submenu items. 3333 Press ▲▼ to select one item and press ◄► to switch the function between [On] and [Off]. WEB control Set to [On] to control with the Web browser. PJLink control Set to [On] to control with the PJLink protocol. Command control Set to [On] to control with the SERIAL IN terminal control command format. AMX D. D. Set to [On] to control with the AMX Device Discovery. RoomView Set to [On] to control with the Crestron RoomView®. Settings ENGLISH - 73