Panasonic PT-EZ570U Operating Instructions - Page 72
Information, Input Source Information Display, Display
View all Panasonic PT-EZ570U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Information Select [Information] from the Main Menu (see "Navigating through the menu" on page 47), then select the item from the sub-menu. Remote Control Side Control JJLamp power The selected lamp mode is displayed. JJLamp runtime The cumulative lamp operating time is displayed. JJFilter counter The filter using time filter is displayed. JJPower management [Off] , [Ready] or [Shut down], and [Timer] are displayed. Input Source Information Display The Information Menu is used for checking the status of the image signal being projected and the operation of the projector. You can also press the button on the remote control to display the Information menu. JJInput The selected input source is displayed. JJSystem The selected system is displayed. JJH-sync freq. The selected H-sync freq. is displayed. The horizontal frequency of the input signal is displayed in KHz, or - - - KHz when no signal. JJV-sync freq. The selected V-sync freq. is displayed. The vertical frequency of the input signal is displayed in Hz, or - - - Hz when no signal. Numbers of Hz doubles when during Interlace. JJScreen The selected Screen size is displayed. JJLanguage The selected language is displayed. JJKey lock The selected Key lock icon is displayed. JJPIN code lock [Off], [On 1] or [On 2] is displayed. JJShutter management* To display the setting of [Protection] and time. *(Only for EZ570 series, EW630 series and EX600 series.) JJSimple mode To display the configuration of a simple remote control mode. JJRemote control The selected remote control code is displayed. JJSerial number The serial number of the projector is displayed. The serial number is used to service the projector. Settings 72 - ENGLISH