Panasonic SABT330 SABT230 User Guide - Page 22
STEP 7:Reprogramming the remote control, Inserting or removing a media
View all Panasonic SABT330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
STEP 7: Reprogramming the remote control Inserting or removing a media When other Panasonic products respond to this remote control Change "Remote Control Code" (> 38) on the main unit and the remote control (the two must match) if you place other Panasonic products close together and it responds to this remote control. To change the code on the main unit. 1 While stopped, press [START]. 2 Press [3, 4] to select "Other Functions" and press [OK]. 3 Press [3, 4] to select "Setup" and press [OK]. 4 Press [3, 4] to select "Others" and press [OK]. 5 Press [3, 4] to select "Remote Control Code" and press [OK]. 6 Press [3, 4] to select the code (1 or 2) and press [OK]. To change the code on the remote control. 1 While pressing [OK] Press and hold the numbered button (1 or 2), which has the same number you selected in the step 6 for more than 5 seconds. 2 Press [OK]. SD CARD SETUP MIC ≥ When inserting a media, ensure that it is facing the right way up. ≥ While the reading indicator is displayed, do not turn off the unit or remove the media. Such action may result in loss of the media's contents. ≥ When removing the SD card, press on the center of the card and pull it straight out. ∫ To switch sources Press [BD/SD] to select "BD/DVD" or "SD". ≥ If a media is inserted while the unit is stopped, the source switches automatically depending on the inserted media. VQT2M13 22