Panasonic SABT330 SABT230 User Guide - Page 41
Troubleshooting guide
View all Panasonic SABT330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Troubleshooting Reference guide Before requesting service, please perform the following steps. (For the U.S.A. and Canada) Do you have the latest firmware installed? Firmware updates may be released to correct operating irregularities that are discovered with certain movies. (> 21) 4 Make the following checks and visit our website for more information. For USA : http://www2.panasonic.com/consumer-electronics/support/ Enter the model number. For Canada : http://www.panasonic.ca 4 Even so, you still have trouble, Visit our website to find a service center. You can find a service center near you easily on our website. Other support information: "Customer Services Directory (United States and Puerto Rico)" (> 50) or "Limited Warranty (Only for CANADA)" (> 51). (For units with PX printed on the packaging) Do you have the latest firmware installed? Firmware updates may be released to correct operating irregularities that are discovered with certain movies. (> 21) Even so, you still have trouble, consult your dealer. The following do not indicate a problem with this unit: ≥ Regular disc rotating sounds. ≥ Image disturbance during search. ∫ Unit does not respond to the remote control or front panel buttons. Press and hold [POWER Í/I] on the main unit for 5 seconds. jIf still unable to power the unit off, disconnect the power cord, wait 1 minute, then reconnect the power cord. ∫ Cannot eject disc. The unit may have a problem. While the unit is off, press and hold [SKIP9] on the remote control and [< OPEN/CLOSE] on the unit at the same time for more than 5 seconds. General operation To return to the factory preset ≥ Select "Yes" in "Restore Default Settings" in the Setup menu. (> 38) To return all settings to the factory preset ≥ Reset the unit as follows: While the unit is off, press and hold [+ VOLUME], [< OPEN/ CLOSE] and [POWER Í/I] on the main unit at the same time for more than 5 seconds. The remote control doesn't work properly. ≥ The remote control and main unit are using different codes. Change the code on the remote control. (> 22) ≥ It may be necessary to set the code of the remote control again after changing the batteries for remote control. (> 22) Disc cannot be played. ≥ The disc is dirty. (> 9) Still pictures (JPEG) do not playback normally. ≥ The images that were edited on the PC, such as Progressive JPEG, etc., may not playback. The TV tuner mode is not displayed when the TV is switched on. ≥ This phenomenon may occur, depending on the TV setting, when "Quick Start" is set to "On". ≥ Depending on the TV, this phenomenon may be prevented by reconnecting the HDMI cable to a different HDMI input terminal or by changing the HDMI auto connection setting. You have forgotten your ratings password. You want to cancel the ratings level. While the disc tray is empty and "BD/DVD" is selected as a source, press and hold [SKIP:] on the remote control and [1] (Play) on the unit at the same time for more than 5 seconds. The ratings level returns to the factory preset. Power No power. ≥ Insert the AC power supply cord securely into a household AC outlet. (> 18) The unit switches to standby mode. ≥ (For the U.S.A. and Canada) This unit will automatically turn to standby mode after 30 minutes if it is inactive. (> 7) ≥(For units with PX printed on the packaging) This is a power saving feature. It can be changed if desired using "Off Timer" in the Setup menu. (> 38) ≥ When the time set for the sleep timer has passed, the power will be turned off. (> 6) ≥ One of the unit's safety devices is activated. Press [POWER Í/I] on the main unit to turn the unit on. Power of this unit is turned off when the input for the TV is changed. ≥ This is a normal phenomenon when using VIERA Link (HDAVI Control 4 or later). For details please read the operating instructions for the TV. Displays The display is dim. ≥ Change "FL Display" in the Setup menu. (> 37) TV screen and video Optional speaker settings The images from this unit do not appear on the TV. Reference Picture is distorted. Jittering occurs. ≥ An incorrect resolution is selected in "HDMI Resolution". Reset the setting as follows: While the disc tray is empty and "BD/DVD" is selected as a source, press and hold [1] (Play) and [∫] (Stop) on the main unit at the same time for more than 5 seconds to cancel the setting. jWhen Dolby Digital Plus, Dolby TrueHD, and DTS-HD audio are not output in bitstream, select "Yes" in "Restore Default Settings" and make proper settings. (> 38) VQT2M13 41