Panasonic SDRH20 Sd/hdd Video Camcorder - Page 104
Others, BEEP SOUND], Beeps, Beeps for 4 times, INITIAL SET], ILLUMINATION], Flash, Lights
View all Panasonic SDRH20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Others ≥ In the following cases, the unit may not turn off even when you set this to [5 MINUTES]. jWhen using the AC adaptor jWhen connecting the unit to a computer or printer via the USB cable ∫ [BEEP SOUND] ≥ [OFF] ≥ [ON] This allows operations such as starting and ending recording to be signaled by a beep. When [OFF] is set, no beep is heard when an operation such as recording is started or ended. 1 Beep When you start recording When you turn on the power When this unit is recognized by the computer or the printer, etc. 2 Beeps When you pause recording When you turn off the power 2 Beeps for 4 times When an error occurs e.g. recording not starting. Check the sentence displayed on the screen. (l 107) ∫ [INITIAL SET] ≥ [YES] ≥ [NO] When there is a menu that cannot be selected due another function or mode being activated, set to [YES] for changing the menu settings back to the initial shipping condition. (The language setting cannot be changed back to the initial shipping condition.) ∫ [ILLUMINATION] ≥ [OFF] ≥ [ON] This allows operations to be signaled by the lighting of the illumination LED on the top of the unit. 1 Flash When you turn on the power (When in a recording mode: in orange) (When in a playback mode: in blue) 2 Flashes When you switch the mode to a recording mode (in orange) When you switch the mode to a playback mode (in blue) Lights 104 LSQT1190 During motion picture recording (in orange) During playback and while connected to a computer, a printer, etc. (in blue) Flashes continuously While formatting, copying, deleting, etc. (in orange) ∫ [DEMO MODE] ≥ [OFF] ≥ [ON] This item is used to start the unit demonstration. (Only when using the AC adaptor and the mode dial is at the or position) If you set this to [ON] without inserting an SD card, this unit is automatically set to the demonstration mode for introducing its functions. If any button is pressed or operated, the demonstration mode is canceled. If no operations take place for approx. 10 minutes, the demonstration mode automatically starts. To terminate the demonstration mode, insert an SD card, or set this to [OFF]. For normal use, set this function to [OFF].