Panasonic SDRH20 Sd/hdd Video Camcorder - Page 37
Adjusting The Lcd Monitor, Press The Power Lcd Plus
View all Panasonic SDRH20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Display style [Y/M/D] [M/D/Y] [D/M/Y] Screen display 2007.DEC.15 DEC.15.2007 15.DEC.2007 ≥ The date and time function are driven by a built-in lithium battery. ≥ Make sure to check the time before recording. ≥ If the time display becomes [- -], the built-in lithium battery has run down. Use the following steps to charge the battery. When you turn on the power for the first time after charging, a message asking you to set the date and time will appear. Select [YES] and set the date and time. To recharge the built-in lithium battery Connect the AC adaptor or attach the battery to the unit, and the built-in lithium battery will be recharged. Leave the unit as it is for approx. 24 hours and the battery will save the date and time for approx. 6 months. (Even if the OFF/ ON switch is set to OFF, the battery is still being recharged.) Adjusting the LCD monitor Adjusting the brightness and color level 1 Press the MENU button, then select [SETUP] # [LCD SET] # [YES] and press the joystick. Setup 2 Move the joystick up or down to select the item to be adjusted. Then, move the joystick left or right to make the adjustment. The bar display moves. [BRIGHTNESS]: Brightness of the LCD monitor [COLOR]: Color level of the LCD monitor ≥ When the LCD monitor is rotated by 180° towards the lens, the brightness and color level of the LCD monitor cannot be adjusted. ≥ These settings will not affect the images actually recorded. Increasing and decreasing the brightness of the entire LCD monitor Press the POWER LCD PLUS button. POWER LCD PLUS MENU 37 LSQT1190