Panasonic WJ-GXE500 Operating Instructions - Page 32
SD memory card: 256 MB, 512 MB, 1 GB
View all Panasonic WJ-GXE500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
*10 • Use the SD memory card after formatting it using the [SD memory card] tab. • Before formatting the SD memory card, it is necessary to select "Use" for "SD memory card" and "Off" for "FTP periodic image transmission" on the [FTP img. trans.] tab of the "Network" page (☞ page 54). • It is impossible to access the SD memory card during the process of formatting. • When an SD memory card is formatted while another user is during operation, the operation will be canceled. • All data saved on the SD memory card will be deleted when the SD memory card is formatted. • Do not turn off the power of the unit during the process of formatting. • After formatting the SD memory card, available size may be smaller than the total size since the default directory is automatically created in the SD memory card. • Recommended SDHC/SD memory card Manufactured by Panasonic (option) SDHC memory card: 4 GB, 8 GB, 16 GB, 32 GB SD memory card: 256 MB, 512 MB, 1 GB, 2 GB (miniSD card and micro SD card excluded) *11 • It may sometimes be impossible to operate when another user is accessing images on the SD memory card. this case, retry later. • Depending on the settings of a proxy server or a firewall, images may not be obtained via a network. *2 • Notification/recording may also not be performed correctly as configured when multiple users are receiv- ing images. • When "D1" is selected for "Image capture mode", it is impossible to save images on the SD memory card. *3 • When the mail notification function or the Panasonic alarm protocol function is used to provide notification of the remaining space of the SD memory card, select a level to be notified at from the following. *4 • Select "FTP error" when using the FTP periodic transmission function and when images are to be trans- mitted to the FTP server at an alarm occurrence. • When selecting "Alarm input", select the channel to save the images on the SD memory card. *5 • The overwrite setting will be as follows according to the "Save trigger" setting. FTP error: Will not be overwritten. Alarm input: Will be overwritten. Manual: Can be determined by selecting "On" or "Off" for "Overwrite". *6 • Enter the file name used for the image to be saved on the SD memory card. The file name will be as fol- lows. File name: ["Entered file name" + "Time and date (year/month/day/hour/minute/second)"] + "Serial number" (☞ Page 56) • When "FTP error" is selected for "Save trigger", images will be saved with the file name entered on the [FTP img. trans.] tab of the "Network" page. (☞ Page 56) *7 • When selecting "Alarm input" for "Save trigger", select the image saving interval and the number of imag- es to be saved. When selecting "Manual", select the image saving interval. *8 • W hen selecting "Manual" for "Save trigger", select the image capture size to save the images. • W hen "FTP error" is selected for "Save trigger", images will be saved with the image capture size selected on the [FTP img. trans.] tab of the "Network" page. (☞ Page 56) • W hen "Alarm input" is selected for "Save trigger", images will be saved with the image capture size selected on the [Alarm] tab of the "Alarm" page. (☞ Page 45) *9 • Total capacity and remaining space of the SD memory card will be displayed. • Depending on the status of the SD memory card, the size indications will differ as follows. --------KB/--------KB: No SD memory card is inserted. Failed to obtain available capacity due to error, etc. ********KB/********KB: The SD card memory is unformatted, or locked, etc. 32