Panasonic WJ-GXE500 Operating Instructions - Page 49

[Advanced func.] page [XML notification] tab Refer to page 28 for general information about this tab. Setup items XML notification *1 Destination setting for XML notification XML notification *2 Notification interval Destination1 - 2 Destination address Destination port number *3 Destination path name User name Password Setting values (Underlined: default) On/Off 1s/2s (Default: None (blank)) 1 - 65535 (Default: None (blank)) (Default: None (blank)) (Default: None (blank)) (Default: None (blank)) *1 • W hen "D1" is selected for "Image capture mode", it is impossible to activate the XML notification function. *2 • W hen "On" is selected, face detection information is notified to the designated destination server in the XML format. *3 • T he following port numbers are unavailable since they are already in use. 20, 21, 23, 25, 42, 53, 67, 68, 69, 110, 123, 161, 162, 995, 10 669, 10 670 [Face detection] tab Refer to page 28 for general information about this tab. Setup items Face detection Face detection *1 *2 *3 *4 XML notification Setting values (Underlined: default) On/Off Important: • When "Multicast" is selected for "Transmission type" on the [JPEG/H.264] (or [JPEG/MPEG-4]) tab and "On" is selected for "Priority stream" on the [System] tab, it may sometimes be impossible to display the face detection setup window. *1 • The face detection function shall not guarantee the detection of faces in an image. The face detection accuracy varies with imaging conditions. *2 • When "Mosaic" is selected for "Display type" of "Privacy zone", the face detection function may some- times be triggered (the face detection frame will be displayed). *3 • When "D1" is selected for "Image capture mode", it is impossible to activate the face detection function. *4 • Face detection is available on Ch1 only. 49