Panasonic WJ-GXE500 Operating Instructions - Page 39
Unicast port2Audio *21
View all Panasonic WJ-GXE500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Setup items MPEG-4 Ch1 (2) Unicast port1(Image) *21 Unicast port2(Audio) *21 Multicast address Multicast port *21 *22 Ch2 - Unicast port1(Image) *21 Ch4 Multicast address Multicast port *21 Multicast TTL/HOPLimit *23 *24 Setting values (Underlined: default) 1 024 - 50 000 (Default: 32 014) 1 024 - 50 000 (Default: 33 014) Available IPv4 address: 224.0.0.0 - 239.255.255.255 Available IPv6 address: Multicast address starting with "FF" (Default: 239.192.0.21) 1 024 - 50 000 (Default: 37 004) 1 024 - 50 000 (Default: [Ch2] 32016 [Ch3] 32018 [Ch4] 32020) Available IPv4 address: 224.0.0.0 - 239.255.255.255 Available IPv6 address: Multicast address starting with "FF" (Default: [Ch2] 239.192.0.23 [Ch3] 239.192.0.25 [Ch4] 239.192.0.27) 1 024 - 50 000 (Default: [Ch2] 37006 [Ch3] 37008 [Ch4] 37010) 1 - 254 (Default: 16) Important: *23 • When two or more network interface cards are installed on the PC in use, the network interface card(s) not used for receiving images should be invalidated when displaying images using the multicast port. *24 • When transmitting an MPEG-4 image via a network, the transmitted image sometimes may not be dis- played depending on the settings of a proxy server or a firewall. In this case, refer to the network administrator. *1 • When this setting is changed, the unit will reboot automatically. *2 • i-PRO Series does not support "D1", if not specified. (As of May, 2010) *3 • When "On" is selected for "MPEG-4 transmission", the refresh interval may be longer than the set value when any value with an asterisk (*) on the right is selected. *4 • When "On" is selected for "MPEG-4 transmission" in "MPEG-4(1)" or "MPEG-4(2)", the transmission inter- val of JPEG images may be longer. *5 • When "On" is selected for "MPEG-4 transmission" in "MPEG-4(1)", displaying of MPEG-4 images or JPEG images on the "Live" page will be available. *6 • When "On" is selected for "MPEG-4 transmission" in "MPEG-4(1)" and "MPEG-4(2)", MPEG-4 images are viewable using other devices with each setting. *7 • When "On" is selected, MPEG-4 images and audio will be transmitted using the HTTP port. *8 • When "On" is selected, only "Unicast port (AUTO)" will be available for "Transmission type". *9 • When "On" is selected, MPEG-4 images may not be displayed depending on the number of the concur- rent access users and audio data availability, etc. *10 • When "On" is selected, only IPv4 access is available. *11 • When "On" is selected for either "MPEG-4(1)" or "MPEG-4(2)", the maximum concurrent access number is equal to or less than 8 users. 39