Panasonic WJ-GXE500 Operating Instructions - Page 51
[System] tab, Default: None blank, NTSC model, PAL model, Image capture size *3, QVGA/VGA
View all Panasonic WJ-GXE500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
[System] tab Refer to page 29 for general information about this tab. Setup items Priority stream Activation *1 Destination IP address(1) - (4) Stream type Refresh interval* *2 *3 Image capture size *3 Setting values (Underlined: default) On/Off (Default: None (blank)) JPEG H.264/MPEG-4(1) H.264/MPEG-4(2) NTSC model: 0.1fps/0.2fps/0.33fps/0.5fps/1fps/2fps/3fps */ 5fps */6fps */10fps */15fps */ 30fps * PAL model: 0.08fps/0.17fps/0.28fps/0.42fps/1fps/2.1fps/ 3.1fps */4.2fps */ 5fps */8.3fps */12.5fps */ 25fps * QVGA/VGA *1 • When "On" is selected for "Activation" of "Priority stream", number of users who can access the unit may be limited. *2 • When "On" is selected for "H.264 transmission" (or "MPEG-4 transmission") or "Ch1 only" is not selected for "Ch selection", the refresh interval may be longer than the set value when any value with an asterisk (*) on the right is selected. *3 • This setting is validated only when "JPEG" is selected for "Stream type". 51