Panasonic WJ-GXE500 Operating Instructions - Page 54
[Network] Network] tab
View all Panasonic WJ-GXE500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
[Network] page [Network] tab Refer to page 29 for general information about this tab. Setup items IPv4 network DHCP *1 IP address(IPv4) *2 Subnet mask Default gateway *3 IPv6 network Manual IP address(IPv6) *4 Common DNS *5 *6 Primary server address *7 Secondary server address *7 HTTP port *8 Line speed *9 FTP access to unit Bandwidth control(bit rate) *10 *11 *12 Easy IP Setup accommodate period Setting values (Underlined: default) On/Off (Default: 192.168.0.10) (Default: 255.255.255.0) (Default: 192.168.0.1) On/Off (Default: None (blank)) Auto/Manual (Default: None (blank)) (Default: None (blank)) 1 - 65 535 (Default: 80) Auto/100M-Full/100M-Half/10M-Full/10M-Half Allow/Forbid Unlimited/64kbps/128kbps/256kbps/384kbps/512kbps/ 768kbps/1024kbps/2048kbps/4096kbps/8192kbps 20 min/Unlimited *1 *2 *3 *4 *5 *6 *7 *8 *9 *10 *11 • C onfigure the DHCP server not to assign the same IP addresses used for the other network devices and PCs whose IP address is unique. Refer to the network administrator for further information about the settings of the server. • D o not enter an IP address already in use (for the PCs and the other network devices). • M ultiple IP addresses for the default gateway are unavailable even when using the DHCP function. Refer to the network administrator for further information about the settings of the DHCP server. • T o establish connections beyond the router via an IP address entered manually, use an IPv6 compatible router, and activate the auto configuration function of IP address. In addition, set an IPv6 address including prefix information given by the IPv6 compatible router. • M ultiple IP addresses for the default gateway are unavailable even when using the DHCP function. Refer to the network administrator for further information about the settings of the DHCP server. • W hen using the DHCP function, it is possible to obtain the DNS address automatically by selecting "Auto". Refer to the network administrator for further information about the settings of the DHCP server. • It is impossible to use both an IPv4 DNS server and an IPv6 DNS server. • T he following port numbers are unavailable since they are already in use. 20, 21, 23, 25, 42, 53, 67, 68, 69, 110, 123, 161, 162, 554, 995, 10 669, 10 670, 52 000, 59 000 - 61 000 • It is recommended to use with the default "Auto". • W hen selecting "64kbps", select "Off" for "Audio mode" on the [Audio] tab. (☞ Page 41) • S elect "128kbps" or a faster rate to carry out the live transmission of JPEG images and the FTP periodic image transmission simultaneously. 54