Panasonic WJ-GXE500 Operating Instructions - Page 43
Off for VD2., work correctly.
View all Panasonic WJ-GXE500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
*3 • Select "On" or "Off" to determine whether or not to apply the VD2 synchronization method for the connected camera. When a camera not supporting the VD2 synchronization method is connected, select "Off" for "VD2". *4 • S elect "On" to control cameras with the coaxial communication. *6 • It is possible to compensate for the video signal transmission loss from the camera. *7 • The following cable length settings are references when using RG-59/U, BELDEN 9259 (for NTSC mod- els), 5C-2V (for PAL models) or equivalent cables. S: Less than 400 m {1 300 ft.} M: 400 m {1 300 ft.} to 700 m {2 300 ft.} L: 700 m {2 300 ft.} to 1 200 m {4 000 ft.} *8 • When cameras with the different RS-485 protocols (for example, cameras manufactured by Panasonic and those manufactured by Pelco, Inc.) in the same RS-485 communication line, the cameras will not work correctly. *9 • Select the communication protocol that is compliant with the specifications of the connected cameras. *10 • Refer to the readme file on the provided CD-ROM for further information about the RS-485 command table. *11 • Select "On" to control cameras with the RS-485 communication. *12 • Set the value in accordance with the RS-485 command table. Refer to the readme file on the provided CD-ROM for further details. 43