Panasonic WJ-GXE500 Operating Instructions - Page 5
Monitor images on a PC, Monitor images from a single camera - password
View all Panasonic WJ-GXE500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Monitor images on a PC The following are descriptions of how to monitor images from the camera on a PC. Monitor images from a single camera Step 1 Start up the web browser. Step 2 Enter the IP address designated using the Panasonic Easy IP Setup software in the address box of the browser. Example when entering an IPv4 address: http://URL registered using IPv4 address http://192.168.0.10/ Example when entering an IPv6 address: http://URL registered using IPv6 address http://[2001:db8::10]/ Important: • When the HTTP port number is changed from "80", enter "http://IP address of the unit + : (colon) + port number" in the address box of the browser. Example: When the port number is set to "8 080" http://192.168.0.11:8080 • When the unit is in a local network, configure the proxy server setting of the web browser (under "Internet Options..." under "Tools" of the menu bar) to bypass the proxy server for the local address. Step 3 Press the [Enter] key on the keyboard. → The "Live" page will be displayed. Refer to page 7 for further information about the "Live" page. When "On" is selected for "User authentication", the authentication window will be displayed before displaying live images for the user name and password entries. The default user name and password are as follows. User name: admin Password: 12345 5