Panasonic WV-CP500 Operating Instructions - Page 28
Step 3, AUTO default, PRESET, For such case subject conditions, Select this recommendation
View all Panasonic WV-CP500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Step 3 Move the cursor to "C/L ← → B/W" and select the back focus adjustment type from the following: AUTO (default): Adjusts the back focus function automatically and corrects out of focus when switching between color and black-and-white images. PRESET: Performs the preset movement to each specified back focus position when switching between color and black-and- white images. The preset position is the back focus position specified last time, which was automatically memorized for each of color images and black-and-white images. FIX: Fixes the position after adjusting the back focus either automatically (ABF) or manually. Step 4 Moving the cursor to "SETUP-SW LOCK" and selecting "ON" allow users to disable the back focus adjustment with the operation buttons (default: OFF). Important: • The following are recommendation for back focus setting in accordance with subjects. For such case (subject conditions) Select this (recommendation) Back focus adjustment "C/L ← → B/W" switching • Normal subject "ABF" "AUTO" • Frequently moving subj. • Subj. with remarkable illuminance change Fine adjustment with "MANUAL-ADJ" after "ABF" or "MANUAL-ADJ" "PRESET" or "FIX" • Subj. with low illuminance • Too bright or reflective subj. • Subj. through a window • Place where the lens easily becomes dirty • Subj. with less contrast such as white wall • Subj. with remarkable depth • Subj. with heavy flicker • Subj. with horizontally parallel lines such as a shutter • We shall not responsible for any inconvenience, loss, or damage caused by the settings or results of the back focus function. 28