Panasonic WV-CP500 Operating Instructions - Page 29
Special menu setting [SPECIAL SETUP], Chroma level adjustment [CHROMA GAIN], Aperture level
![]() |
View all Panasonic WV-CP500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Special menu setting [SPECIAL SETUP] The special menu setup is performed including the setting of the camera image quality and the communication configuration when a receiver is used. The following settings are to be configured on the "SPECIAL SETUP" screen displayed from the top screen. Refer to page 5 for how to call up the screen. **SPECIAL SETUP** CHROMA GAIN ...|...128 AP GAIN ...|... 32 PEDESTAL ...|... 32 HUE ...|... 0 - + PIX OFF COMMUNICATION COAX CAMERA RESET PUSH SW SER.NO. XXXXXXXX RET TOP END Chroma level adjustment [CHROMA GAIN] Use the right or left button to adjust the color density of the camera image. When the level indicator moves in the "+" direction, the color becomes deeper, and when the level indicator moves in the "-" direction, the color becomes lighter. Be sure to view a vector chromaticity indicator or a monitor when the adjustment is performed. Aperture level adjustment [AP GAIN] Use the right or left button to adjust the image quality. When the level indicator moves in the "+" direction, the image becomes sharper, and when the level indicator moves in the "-" direction, the image becomes softer. Be sure to view a monitor when the adjustment is performed. Note: • Moire (interference fringes) may be observed when shooting a subject with fine pattern such as a carpet or a curtain. In such a case, move the indicator in the "-" direction to reduce moire. Pedestal level adjustment [PEDESTAL] Use the right or left button to adjust the pedestal level of the camera. When the level indicator moves in the "+" direction, the image becomes brighter, and when the level indicator moves in the "-" direction, the image becomes darker. Be sure to view a waveform monitor or a monitor when the adjustment is performed. Chroma phase (hue) adjustment [HUE] Use the right or left button to adjust the pedestal level of the camera. Be sure to view a vector chromaticity indicator or a monitor when the adjustment is performed. Note: • Holding down the right and left buttons for more than 2 seconds simultaneously restores the settings of "CHROMA GAIN", "AP GAIN", "PEDESTAL", and "HUE" to the default settings. 29
![](/manual_guide/products/panasonic-wvcp504-operating-instructions-97a245c/29.png)