Panasonic WV-CP500 Operating Instructions - Page 8
Camera operation setting [CAMERA SETUP], 1. Register a scene file [SCENE1/SCENE2 - g manual
View all Panasonic WV-CP500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Camera operation setting [CAMERA SETUP] The following describes the camera operation settings. The following settings can be configured on the "CAMERA SETUP" screen displayed from the top screen. Refer to page 5 for how to call up the screen. The settings configured on the "CAMERA SETUP" screen will be saved as a scene file. "CAMERA SETUP" screen q w e r t y u i o **CAMERA SETUP** SCENE1 ALC/ELC ALC SHUTTER OFF AGC ON(HIGH) SENS UP OFF WHITE BAL ATW1 DNR HIGH BW MODE AUTO1 i-VMD RET TOP END 1. Register a scene file [SCENE1/SCENE2] It is possible to register 2 patterns of scene file. For example, when different settings are to be applied between day and night, SCENE1 can be applied in the daytime and SCENE2 at night. Change between the scene files can be made on the ALARM IN setting or shortcut operation. (+ Pages 23 and 24) "SCENE1" is set as the default setting. Screen when "SCENE1" is selected **CAMERA SETUP** SCENE1 ALC/ELC ALC SHUTTER OFF AGC ON(HIGH) SENS UP OFF WHITE BAL ATW1 DNR HIGH BW MODE AUTO1 i-VMD RET TOP END Screen when "SCENE2" is selected **CAMERA SETUP** SCENE2 ALC/ELC ALC SHUTTER OFF AGC ON(HIGH) SENS UP OFF WHITE BAL ATW1 DNR HIGH BW MODE AUTO1 i-VMD COPY(SCENE1) RET TOP END Step 1 After confirming that "SCENE1" is selected, configure the settings of "ALC/ELC" through "i-VMD". (☞ Pages 9 - 20) When using while changing the scene files, go to step 2. Step 2 Move the cursor to "SCENE1" and use the right or left button to select "SCENE2". → The "COPY(SCENE1)" screen will be displayed. Step 3 To configure the settings of "SCENE2" using the settings of "SCENE1", press the setting button after moving the cursor to "COPY(SCENE1)". → The settings of "SCENE1" will be copied to "SCENE2". Step 4 Edit the settings to be changed and saved as the settings of "SCENE2". The number displayed at the right side of the title on each setting screen inidicates a scene file number. **ALC CONT**(1) BACK LIGHT COMP SUPER-D5 ON Scene file number LEVEL MANUAL ABS ...|... 0 - + RET TOP END 8