Pentax IQZoom 90WR IQZoom 90WR Manual - Page 14

2. FILM LOADING Make sure the power is off before inserting the film. 2 L32 1 Slide the back cover release lever down in the direction of the arrow to open the back cover as illustrated. 2 Place the film cartridge in the film chamber by fitting its flat side on top of the rewind shaft first and then slide the top end into the camera. 3 Pull the film leader out far enougb from the cartridge to reach the take-up spool.. Align the tip with the film leader end mark I lO Notes: • Make sure the film is properly placed between the guide rails. • If there is dirt on the film detection sections, film cannot be wound properly. Slack NO l O Flat YES • Make sure the film is taut as illustrated. Take up any slack in the film by pushing it back into the cartridge. • If the end of the film leader is extremely bent, straighten it or cut off the bent portion. 10