Pentax IQZoom 90WR IQZoom 90WR Manual - Page 40
disassemble
View all Pentax IQZoom 90WR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Zooming using the Remote Controller When the Remote Control Projector is aimed towards the camera's Remote Control Receiver, each time you press the zooming button, the lens zooms and stops at steps of 90, 60, and 38mm focal length settings continuously. • When using the Remote Controller to zoom the lens, frame the subject through the viewfinder, assuming the setting of the zoom lens is 90mm telephoto setting. Otherwise, the subject will be out of the picture area. • You may zoom the lens in and out to change the picture area with the Remote Controller while the focus is being locked. • The lens cannot zoom in and out in the macro mode using the Remote Controller. Attaching the Remote Controller Attach the Remote Controller to the camera after use. Slide the Remote Controller until it locks in place with a click. Battery life on the Remote Controller About 30,000 commands can be issued using the Remote Controller with a battery installed in the Remote Controller. Have exhausted battery replaced at the Pentax Service center located nearest you if the battery is exhausted (service is chargeable). Never disassemble the Remote Controller. Otherwise, you may damage the weather-resistant parts.