Pentax SF-1 SF-1 Manual - Page 33
Drive, Focusing
View all Pentax SF-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
DRIVE MODE AND FOCUSING MODE 09 • 2 4--0. E.) Vol V RSIEA•RNvUoA- L SINGLE Drive Modes To set a drive mode, slide the select switch to the UP or DOWN position while pressing the mode/drive switch to the DRIVE position until the mark representing the desired mode appears on the CENTIC panel. If the select switch is held at one position, the marks will change continuously. (L)) = Self-timer mark (see page 49.) (S) = Single advance When you press the shutter release button, the motor drive advances the film to the next frame and stops. = Consecutive advance As long as you hold the shutter release button down, the motor drive keeps advancing the film at a speed of approx. 1.8 frames per second. Focusing Modes Auto-Focus (AF) Modes 0 AF SINGLE Focusing continues until the subject is captured in focus. The shutter can then be released. AF SERVO If the subject moves, the camera continues focusing on it. The shutter can be released anytime, even if the subject is not in focus. Manual Focus Mode O MANUAL Push up the focus-mode switch while pressing the manual-focus button. Focusing can be done manually with the assistance of the Fl (Focus Indication) system. 29 •