Philips BDP5506/F7 User Manual - Page 46

D Note for "IP Address", "Subnet Mask", "Default Gateway", "Primary DNS" and "Secondary DNS" • The range of input numbers is between 0 and 255. • If you enter a number larger than 255, the number will automatically be reset to 255. • When you enter a wrong number, select "Clear" to clear. (The number will be reset back to "0".) • If you want to enter a 1 or 2-digit number in one cell, press [B] to move on to the next cell. D Note for "Proxy Address" and "Proxy Port" • The range of input numbers for the port number is between 0 and 65535. (If you enter a number larger than 65535, it will be regarded as 65535.) • For proxy port, certain ports might be closed, blocked or unusable depending on your network environment. • Choose a connection speed in accordance with your network environment. • When the settings are changed, the network connection may be disabled depending on the device. Ⅲ Wireless If you connect this unit to the network wirelessly, select "Wireless" and set up necessary settings. Please make a note of your Wi-Fi network name (SSID) and its WEP / WPA key before proceeding with the setup. Auto Scan Search for Wi-Fi networks automatically and select the WiFi network name (SSID) from the list. 1. Follow steps 1 to 2 in "Auto Setup" on page 44. 2. Use [K / L] to select "Wireless", then press [OK]. 3. Use [K / L] to select "Auto Scan", then press [OK]. • This unit will start searching for Wi-Fi networks automatically. 4. The result of Wi-Fi network searching will be displayed. Use [K / L] to select the appropriate Wi-Fi network name (SSID), then press [OK]. • If you select an SSID without " ", please go to step 6. 5. "Access Point Setting (Auto Scan)" screen will appear. Enter the WEP / WPA key of the selected Wi-Fi network using cursor buttons, number buttons and color key, then press [Red]. • If you do not know the WEP / WPA key for your Wi-Fi network, ask your ISP or the person who set up your Wi-Fi Network. Access Point Setting (Auto Scan) Please input the WEP/WPA key with keypad or software keyboard. XXXXXXXXXX Done Cancel Clear a/A/@ 6. Use [K / L] to select "Continue", then press [OK]. Please confirm the setting. SSID Access 1 Security WPA-PSK(AES) WEP/WPA Key XXXXXXXXXX Continue Rescan Cancel 7. Use [K / L] to select "Auto Setup" or "Manual Setup", then press [OK]. • If you select "Auto Setup", follow step 5 in "Auto Setup" on page 44. • If you select "Manual Setup", follow steps 3 to 12 and 14 to 16 in "Manual Setup" on page 44. D Note • The internal wireless LAN supports following specifications - Wi-Fi standards : IEEE 802.11 b/g/n - Frequency spectrum : 2.4 GHz - Security protocol : WEP / WPA / WPA2 Please select the access point. Rescan Cancel Access 1 Access 2 Access 3 Access 4 Access 5 Access 6 Access 7 EN - 46