Philips VOIP8410B User manual - Page 11

Xtra HS_VOIP841_US-EN.book Seite 9 Dienstag, 13. Februar 2007 11:42 11 ENGLISH 4 Press on the base unit until the two indications turn off. • If registration is successful, the signal icon displays steadily. Tip If registration failed, repeat the above procedure. Note The base can register up to 4 handsets, then the base unit registration memory is full. If you attempt to register an additional handset, the registration process will be aborted. You can use additional base units, see "Register your handset(s) with additional base", page 16. 3.4.2 Turn the handset OFF 1 Press and hold for 2 seconds. • The power menu is displayed. 2 Scroll to Switch Off. Press Select . • The handset is switched off. Note The handset cannot receive any call if the power is switched off. 3.3.1 Verify the signal strength The signal icon displays the link status between the handset and the base unit. Signal icon : The handset and base unit are linked. They can communicate. No signal icon : The handset and base unit have lost link. They are not able to communicate. Take your handset closer to the base unit to reconnect the link. If you move too far away from the base unit while you are on the phone, you will hear warning tones notifying you that the handset is almost out of range - lost link. Take the handset closer to the base unit or your call will be cut off shortly after the warning. Note If your handset has lost link, you will not be able to make or receive any call. In addition, you will not be able to carry out many of the phone functions and features. 3.4 Turn the handset ON/OFF 3.4.1 Turn the handset ON Press . • The handset may take a few seconds to power up. Getting started 9