Pioneer PDP-5020FD Owner's Manual - Page 18
When looking at the back of the, flat panel TV, sides are reversed., Tighten screws in the order, - review
UPC - 012562887098
View all Pioneer PDP-5020FD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
02 Install Your Flat Panel TV Attach/Detach the Speaker The flat panel TV's speaker delivers high-quality, clear sound. The left/right balance is enclosed in a single unit for ease of installation and compactness. Although other devices can be added or removed from the mounted panel, physically attach the speaker last. Disconnect the cables from the Speaker and REMOVE THE SPEAKER before mounting or moving the panel. Before attaching the speaker to your mounted panel, review the information below. • Lay the panel face down on a stable surface when attaching speaker brackets. • Use only the supplied screws and tighten securely before stepping away. • The speaker is wide and requires more than a single person to manage. • Handle the speaker carefully to protect the cabinet and grille net from scratches and other damage. • Placing a CRT monitor near the speaker can cause a blur on the flat panel TV. Keep the distance between the speaker and the monitor. • Connecting this speaker to another panel or device can damage the unit or cause a fire. • When using tone control to increase treble, avoid overamplifying the volume. Note: Use the foam packing materials to protect the equipment from scratches or other damage during mounting. Stand-Mounted Panel It is possible to attach the speaker brackets to the flat panel TV while it is standing upright though it is easier to mount the brackets while the panel is laying flat. Once the brackets are attached, stand the panel upright then move it into the final position before mounting the speaker. 1 ) Attach the side speaker brackets (left and right) to the back of the panel using the supplied screws. (PDP-6020FD) (PDP-5020FD) Speaker mounting screw (M5 x 10 mm) ➀ ➁ 1 ) Tighten the screw in the upper screw hole first. 2 ) Then, tighten the screw in the screw hole right under the upper hole. ➀ ➁ Speaker bracket (side) When looking at the back of the flat panel TV, sides are reversed. Tighten screws in the order shown above. 18 En