Pioneer PDP-5020FD Owner's Manual - Page 43

Basic Operations For Television Viewing 03 English 3.4.2 General Picture (Video) Adjustment for an AV Source The directions below apply to all AV sources except OPTIMUM and DYNAMIC. If the viewing option is OPTIMUM, your flat panel TV automatically adjusts the picture to the best possible level. If the preferred viewing option is DYNAMIC, please refer to "4.1 Choose an AV Option (Video, Game, etc.)." For standard picture adjustments, follow the steps below. 1 ) Access the Picture through the Setup. 2 ) Select an item to be adjusted. Contrast is used in the example below. AV Selection Contrast Brightness Color Tint Sharpness PureCinema Reset Picture : PERFORMANCE : 40 : 0 : 0 : 0 : 0 3 ) Use the arrow buttons (/) to adjust to the desired level. Contrast 32 4 ) Press HOME MENU to exit the menu. Reduce Noise from Analog TV Sometimes electronic signal static can cause imperfections in the picture. This static is called Video Noise. Your flat panel TV can reduce video noise from an analog TV channel, depending on the broadcast signal level. Sometimes the broadcast signal has higher interference levels so that some video noise is noticeable. This function is only selectable for signals from an antenna. Follow the steps below to reduce noise on an analog TV channel. 1 ) Access the System Setup through the Setup. 2 ) Select Analog TV Setup from the System Setup menu. 3 ) Select Manual Adjust from the submenu. Only analog channels set using Auto Installation are manually adjustable. 4 ) Select Program Entry. 5 ) Select a channel number to be added. Use the arrow buttons (/) to enter a channel number. 6 ) Select Tuner NR. 7 ) Select On. The default setting is On. 8 ) Press HOME MENU to exit the menu. 43 En