Pioneer PDP-5020FD Owner's Manual - Page 19
Tighten screws in the order, shown above. - stand
UPC - 012562887098
View all Pioneer PDP-5020FD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Install Your Flat Panel TV 02 2 ) Attach the center speaker bracket using the supplied screws. When fitting the screws, place screws 1 and 2 through the holes in the center bracket. (PDP-6020FD) (PDP-5020FD) English Speaker bracket for center ➁ ➀ Speaker mounting screw (M5 x 10 mm) ➁ ➀ Tighten screws in the order shown above. 3 ) Position the speaker by the brackets. It is very easy to mount the speaker upside-down so confirm that the speaker is aligned properly before continuing. 4 ) Insert the speaker bracket into the grooves at the rear of the speaker. If the speaker fails to mount easily, adjust the angle of the brackets. •Insert the speaker from the bottom in an angle. •Straighten it when it touches the speaker bracket. Note: Reverse procedure to remove the speaker. Protective wrapping Front side of the speaker The side with the padding strip is face-up. For illustrative purposes, the stand is not shown. Insert the speaker brackets into the grooves at the rear of the speaker. 5 ) Attach the speaker to the center bracket using the supplied screws. The drawing in the next Step shows the proper order for tightening screws. 19 En