Pioneer PDP-5020FD Owner's Manual - Page 42

03 Basic Operations For Television Viewing The SLEEP indicator on the front of the flat panel TV lights orange when the Sleep Timer is set. To check the remaining time, press TOOLS then select Sleep. "Remain ---min" appears at the top of the menu screen. After checking the time, press EXIT to return to your program without losing the Sleep Timer setting. Note: When the sleep timer has been set, "Remain ---min" appears at the top of the menu. However, the Video Pattern timer has priority over the sleep timer. When the Video Pattern timer is on, the sleep timer is deactivated. Video Pattern is explained fully later in this manual. 3.4 Adjust the Picture and Sound Quality Your flat panel TV has many adjustment options for the picture and the sound to make it just right for you. This section provides basic adjustments but for detailed video/audio modifications, refer to "4 Additional Picture and Sound Adjustment Options" and "4.7 Select Alternatives for/to Sound." 3.4.1 Adjust the Picture for Your Room Lighting The flat panel TV senses the amount of light in your room and automatically adjusts the screen brightness for the best picture. Bright rooms require stronger coloring so images appear crisp while dimly lit rooms allow the picture to use more subtle coloring. The panel ships with the Room Light Sensor turned Off. The sections below provide directions to turn the room lighting sensor On/Off. Room Lighting Sensor To deactivate/reactivate the room lighting sensor, follow the steps below. 1 ) Access the Option through the Setup. 2 ) Select Room Light Sensor from the Option menu. 3 ) Select On (or Off ) from the submenu. Game Control Pref : Off Room Light Sensor : Off Screen Protection Label Input 4 ) Press HOME MENU to exit the menu. 42 En