Pioneer PRO-1000HD Owner's Manual - Page 18

Installation and Connections Audio Connections Before making connections, be sure to check that the audio component's power and the unit's main power is off. Connecting the speakers This unit is equipped with a 2W+2W internal amplifier. If speakers are to be connected to the unit, following the accompanying connection instructions. 10 mm Twist exposed wire strands together. Push tab to the open position, and insert the wire. Then, close tab firmly to secure the wire in place. Note When making speaker connections, be sure to match the polarities (+ and -) of the speaker terminals on this unit and the corresponding terminals on the speakers. If the polarity is reversed, the sound will be unnatural and lack bass. Making connections to the audio inputs on this unit This unit features three audio inputs and one audio output. The following chart shows the video inputs and the corresponding audio input terminals. Video input INPUT1 INPUT2 INPUT3 INPUT4 Audio input terminal Stereo mini jack (L/R) Pin jacks (L/R) Pin jacks (L/R) Sound output Sound of the selected video input is output from the • SPEAKER terminals • Stereo mini jack (L/R). Audio connections for component (computer) connected to INPUT 1 or INPUT 2 AUDIO VD INPUT OUTPUT 7Ω5Ô2k.Ω2 (INPUT1/2) Audio input to the AUDIO INPUT terminal (stereo mini jack) is possible for a component connected to either INPUT1 or INPUT2. Sound is output from both the AUDIO OUTPUT terminal (stereo mini jack) and the SPEAKER terminals according to the video input selection. Audio connection for component connected to INPUT3 AUDIO INPUT3 S-VIDEO R L Audio input to the AUDIO INPUT3 terminals (pin jacks (L/ R)) is possible for a component connected to INPUT3. Sound is output from both the AUDIO OUTPUT terminal (stereo mini jack (L/R)) and the SPEAKER terminals according to the video input selection. 14 PRO-1000HD / PRO-800HD