Pioneer SC-85 Owner's Manual - Page 101

11 The MCACC PRO menu Speaker Distance Use this to display the distance from the different channels to the listening position. See Speaker Distance on page 106 for more on this. 1 Select 'Speaker Distance' from the MCACC Data Check menu. 2 When 'MCACC' is highlighted, use k/l to select the MCACC preset you want to check. The distance from the various channels set at the selected MCACC preset is displayed. '---' is displayed for channels that are not connected. Standing Wave Use this to display the standing wave related adjustment values for the various MCACC memories. See Standing Wave on page 99 for more on this. 1 Select 'Standing Wave' from the MCACC Data Check menu. 2 When 'Filter Channel' is highlighted, use i/j to select the channel for which you want to check standing wave control. The standing wave related calibration value for the selected channel stored at the selected MCACC preset and its graph are displayed. 3 Press k to highlight 'MCACC', then use i/j to select the MCACC preset you want to check. Acoustic Cal EQ Use this to display the calibration values for the frequency response of the various channels set in the different MCACC presets. See Acoustic Calibration EQ Adjust on page 99 for more on this. 1 Select 'Acoustic Cal EQ' from the MCACC Data Check menu. 2 When 'Ch' is highlighted, use i/j to select the channel. The calibration value for the frequency response of the selected channel stored at the selected MCACC preset and its graph are displayed. 3 Press k to highlight 'MCACC', then use i/j to select the MCACC preset you want to check. Group Delay Use this to display the calibrated speaker group delay results. See Better sound using Phase Control and Full Band Phase Control on page 67 for more on this. 1 Select 'Group Delay' from the MCACC Data Check menu. 2 When 'Channel' is highlighted, use k/l to select the channel you want to check. The result of group delay calibration for the selected channel is displayed. When measurements have been performed with Full Auto MCACC selected at MCACC PRO or with ALL or Full Band Phase Ctrl selected when Auto MCACC is selected, the graph before group delay calibration is also displayed. When After is selected at Calibration, the group delay after calibration is displayed. Compared to when Before is selected, with After there is less difference in the delay between frequency bands and the group delay between the different channels is uniform, allowing you to check the full band phase control effect. No Data is displayed if the selected group delay has not been measured. ! The Full Band Phase Control function does not work for Dolby enabled speakers since they are full-range speakers. Data Management This system allows you to store up to six MCACC presets, allowing you to calibrate your system for different listen- ing positions (or frequency adjustments for the same listening position). This is useful for alternate settings to match the kind of source you're listening to and where you're sitting (for example, watching movies from a sofa, or playing a video game close to the TV). From this menu you can copy from one preset to another, name presets for easier identification and clear any ones you don't need. ! This can be done in Automatically conducting optimum sound tuning (Full Auto MCACC) on page 51 or Automatic MCACC (Expert) on page 96 , either of which you should have already completed. 1 Press MAIN RECEIVER to switch the remote control to the receiver operation mode, and then press HOME MENU. A Graphical User Interface (GUI) screen appears on your TV. Use i/j/k/l and ENTER to navigate through the screens and select menu items. Press RETURN to exit the current menu. 2 Select 'Data Management' from the HOME MENU. 3 Select the setting you want to adjust. ! Memory Rename - Name your MCACC presets for easy identification (see Renaming MCACC presets on page 101 ). ! MCACC Memory Copy - Copy settings from one MCACC preset to another (see Copying MCACC preset data on page 102 ). ! MCACC Memory Clear - Clear any MCACC presets that you don't want (see Clearing MCACC presets on page 102 ). Renaming MCACC presets If you have several different MCACC presets that you're using, you may want to rename them for easier identification. 1 Select 'Memory Rename' from the Data Management setup menu. 2 Select the MCACC preset you want to rename, then select an appropriate preset name. Use i/j to select the preset, then k/l to select a preset name. 3 Repeat for as many MCACC presets as necessary, then press RETURN when you're finished. You will return to the Data Management setup menu. 101