Pioneer VSX-36TX Owner's Manual - Page 90

Techno Tidbits & Problem-solving Specifications Amplifier Section VSX-37TX : Continuous average power output of 120 watts* per channel, min., at 6 ohms, from 20 Hz to 20,000 Hz with no more than 0.09 %** total harmonic distortion (front). VSX-36TX: Continuous average power output of 100 watts* per channel, min., at 8 ohms, from 20 Hz to 20,000 Hz with no more than 0.09 %** total harmonic distortion (front). VSX-37TX : Continuous Power Output Front ..... 120 W + 120 W (20 Hz-20 kHz, 0.09 %, 6 Ω) Center 120 W (20 Hz-20 kHz, 0.09 %, 6 Ω) Rear ...... 120 W + 120 W (20 Hz-20 kHz, 0.09 %, 6 Ω) VSX-36TX : Continuous Power Output Front ..... 100 W + 100 W (20 Hz-20 kHz, 0.09 %, 8 Ω) Center 100 W (20 Hz-20 kHz, 0.09 %, 8 Ω) Rear ...... 100 W + 100 W (20 Hz-20 kHz, 0.09 %, 8 Ω) Audio Section Input (Sensitivity/Impedance) PHONO MM 4.7 mV/47 kΩ VCR 1/DVR, VCR 2, DVD/LD, TV/SAT, VIDEO, CD MD/TAPE 1/CD-R, TAPE 2 335 mV/47 kΩ Phono Overload level (T.H.D.0.1 %, 1kHz) PHONO MM 120 mV Frequency Response PHONO MM 20 Hz to 20,000 Hz ± 0.3 dB VCR 1/DVR, VCR 2, DVD/LD, TV/SAT, VIDEO, CD MD/TAPE 1/CD-R, TAPE 2 .... 5 Hz to 100,000 Hz +0 -3 dB Output (Level/Impedance) VCR 1/DVR REC, VCR 2 REC, MD/TAPE 1/CD-R REC TAPE 2 REC 335 mV/2.2 kΩ Tone Control BASS 6 dB (100 Hz) TREBLE 6 dB (10 kHz) LOUDNESS 10 dB (100 Hz/10 kHz) Signal-to-Noise Ratio (IHF, short circuited, A network) PHONO MM 80 dB VCR 1/DVR, VCR 2, DVD/LD, TV/SAT, VIDEO, CD MD/TAPE 1CD-R, TAPE 2 101 dB MULTI CHANNEL IN ... 101 dB(Channel Level:Bypass) Signal-to-Noise Ratio [EIA, at 1 W (1 kHz)] PHONO MM 80 dB VCR 1/DVR, VCR 2, DVD/LD, TV/SAT, VIDEO, CD MD/TAPE 1/CD-R, TAPE 2 83 dB * Measured pursuant to the Federal Trade Commission's Trade Regulation rule on Power Output Claims for Amplifiers. ** Measured by Audio Spectrum Analyzer. Video Section Input (Sensitivity 1 Vp-p/75 Ω Output (Level/Impedance 1 Vp-p/75 Ω Signal-to-Noise Ratio 65 dB Frequency Response 5 Hz to 10 MHz +0 -3 dB Component Video Section Input (Sensitivity 1 Vp-p/75 Ω Output (Level/Impedance 1 Vp-p/75 Ω Signal-to-Noise Ratio 65 dB FM Tuner Section Frequency Range 87.5 MHz to 108 MHz Usable Sensitivity ...... Mono: 13.2 dBf, IHF (1.3 µV/75 Ω) 50 dB Quieting Sensitivity Mono: 20.2 dBf Stereo: 38.6 dBf Signal-to-Noise Ratio Mono: 73 dB (at 85 dBf) Stereo: 70 dB (at 85 dBf) Distortion Stereo: 0.5 % (1 kHz) Alternate Channel Selectivity 60 dB (400 kHz) Stereo Separation 40 dB (1 kHz) Frequency Response 30 Hz to 15 kHz (± 1) dB Antenna Input 75 Ω unbalanced AM Tuner Section Frequency Range 530 kHz to 1,700 kHz Sensitivity (IHF, Loop antenna 350 µV/m Selectivity 25 dB Signal-to-Noise Ratio 50 dB Antenna Loop antenna Miscellaneous Power Requirements AC 120 V, 60 Hz VSX-37TX : Power Consumption 460 W, 630 VA Power Consumption in Standby mode 1.0 W AC Outlet SWITCHED (×2 Total 100 W (0.8 A) MAX UNSWITCHED 100 W (0.8 A) MAX Dimensions 420 (W) × 173 (H) × 470 (D) mm (16-9/16 (W) × 6-13/16 (H) × 18-1/2 (D) in.) Weight (without package 15.2 kg (33 lb 9 oz) VSX-36TX : Power Consumption 400 W, 550 VA Power Consumption in Standby mode 1.0 W AC Outlet SWITCHED (×2 Total 100 W (0.8 A) MAX UNSWITCHED 100 W (0.8 A) MAX Dimensions 420 (W) × 173 (H) × 470 (D) mm (16-9/16 (W) × 6-13/16 (H) × 18-1/2 (D) in.) Weight (without package 14.4 kg (31 lb 13 oz) 90