Pioneer VSX-515-K Owner's Manual - Page 9

5 minute guide 02 Front speakers Center speaker L R C Surround speakers Surround back speakers LS RS SBL SBR English Deutsch Français Italiano Nederlands Español R AUDIO L IN CD FM UNBAL 75 Ω AM LOOP ANTENNA OUT OPT IN 1 (TV/SAT) IN ASSIGNABLE DIGITAL IN IN COAX 2 (CD) OUT COAX 1 (DVD /LD) IN DVR/ VCR IN TV / SA T IN DVD /LD FRONT D V D 5.1CH REC INPUT CD-R IN / TAPE / MD PLAY VIDEO OUT MONITOR OUT SUB WOOFER PREOUT CEN- SUB TER WOOFER R L SURROUND DVD 5.1CH INPUT COMPONENT VIDEO ASSIGNABLE (DVD / LD) IN ¥ Y PB PR Y PB PR MONITOR OUT (T V / SAT)IN ø S R FRONT L CENTER R SURROUND BACK L R SURROUND L P E A SINGLE K SEE INSTRUCTION MANUAL E R S VSX-515 Powered subwoofer SW INPUT Single surround back speaker AC OUTLET 4 Plug in the receiver and switch it on, followed by your DVD player, subwoofer and TV. Make sure you've set the video input on your TV to this receiver. Check the manual that came with the TV if you don't know how to do this. Also make sure that DVD/LD is showing in the receiver's display, indicating that the DVD input is selected. If it isn't, press DVD on the remote control to set the receiver to the DVD input. 5 Press QUICK SETUP on the front panel to specify your speaker setup, room size and listening position. Use the MULTI JOG dial to select and ENTER to confirm your selection. See Using the Quick Setup on page 10 if you're unsure about the settings. 6 Play a DVD, and adjust the volume to your liking. There are several other sound options you can select. See Listening to your system on page 29 for more on this.1 See also Choosing your receiver setup on page 37 (VSX-415) or The System Setup menu on page 41 (VSX-515) for more setup options. Note 1 Depending on your DVD player or source discs, you may only get digital 2 channel stereo and analog sound. In this case, the listening mode must be set to STANDARD (it should already be set-see Listening in surround sound on page 29 if you need to do this) if you want multichannel surround sound. 9 En